喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================喜歡這套資料就充值下載吧。。。資源目錄里展示的都可在線預覽哦。。。下載后都有，，請放心下載，，文件全都包含在內，，【有疑問咨詢QQ:414951605 或 1304139763】
========================================
沈陽工學院畢業設計說明書
摘 要
[鍵入文字]
床身是立式加工中心非常重要的基礎支撐件，它起到了支撐立柱、滑座、工作臺等重要零部件的作用，主要承受機床的靜載荷以及在加工時產生的切削負載。床身的靜動態性能直接影響機床的加工精度和穩定性,因此，床身結構的優化對于立式加工中心的發展具有十分重要的意義，本課題即結合沈陽機床廠VMC850B立式加工中心的性能特點與相關參數，對立式加工中心床身結構進行了科學系統的設計，具體內容如下：
（1）借鑒于同類型的床身結構，根據VMC850B的整機結構設計了床身上表面布局，通過查閱《實用機床設計手冊》《機械設計手冊》等參考書，科學的設計了床身的截面形狀，包括壁厚的選定以及加強肋、方孔、圓孔的合理布置。同時對床身進行了受力分析并利用ANSYS軟件對床身模型采取了靜態力有限元分析。
（2）針對與床身相關的重要零部件，包括Y方向伺服進給系統的驅動電機、滾珠絲杠、直線導軌、軸承、聯軸器，進行了分析與計算，并最終確立了型號與參數。
（3）提出了床身的精度要求，包含加工和裝配過程中的幾何精度。
關鍵詞：立式加工中心；床身；結構設計；選型計算；有限元分析；精度設計
沈陽工學院畢業設計說明書
Abstract
The bed is a very important basis for supporting parts in the vertical machining center, it plays a role that supporting the column, the slide, the workbench and some other important parts. The bed mainly withstands the static load of the machine tool and the cutting load in the processing. The static and dynamic performance of the bed directly affects the machining accuracy and stability. Therefore, the optimization of the bed structure has great significance for the development of the vertical machining centers. The subject, which is combined with the performance characteristics and parameters of the vertical machining center 850B of the Shenyang Machine Tool Factory, have designed the bed structure of the vertical machining center scientifically and systematically, the details are as follows:
(1)Learnt from the bed structure of the same type and designed the layout of the bed top surface under VMC850B’s whole structure, through accessing to
and and other reference books, scientifically designed the cross-sectional shape of the bed, including the selection of the wall thickness as well as the reasonable layout of the reinforcing rib, the square and circle holes. The subject also did the stress analysis for the bed and used the software called ANSYS to do the finite element analysis of the static force for the model of the bed.
(2)For the important parts of the bed, including the Y-direction servo feed drive motor, ball screws, linear guides ,bearings and couplings, did the analysis and the calculation, and eventually established the models and the parameters.
(3)Put forward the accuracy requirements of the bed, including the geometric precision of the machining and assembly process.
Keywords: the vertical machining ；center the bed ； structural design ；selection calculation finite element analysis ； precision design
沈陽工學院畢業設計說明書
目 錄
1 機床設計現狀 1
1.1 課題研究的背景和意義 1
1.2 國內外研究現狀與發展趨勢 2
1.3 本論文內容概要 4
2 床身結構設計 4
2.1 床身材料 4
2.2 床身時效處理 4
2.3 床身結構設計 5
2.3.1床身重要表面設計 5
2.3.2床身截面形狀設計 5
2.4 床身熱變形 10
2.5 床身結構確定方案 11
3 床身零部件的計算與選型 12
3.1 Y方向滾珠絲杠副的選擇 12
3.1.1 初步計算絲杠導程 13
3.1.2 滾珠絲杠副當量載荷與當量轉速計算 14
3.1.3計算預期額定動載荷 17
3.1.4 估算滾珠絲杠允許最大軸向變形 18
3.1.5估算滾珠絲杠副的底徑 18
3.1.6 計算滾珠絲杠副預緊力 20
3.1.7 滾珠絲杠副剩余結構尺寸確定 20
3.2 伺服電機的選擇 21
3.2.1電機的負載轉矩計算 21
3.2.2 慣量匹配計算 22
3.2.3空載啟動時最大加速力矩計算： 24
3.2.4快速空載啟動時所需最大啟動力矩計算 24
3.2.5 電動機連續勻速工作時的最大力矩 25
3.2.6 電動機輸出端軸的直徑計算 25
3.3 滾動軸承的選擇 25
3.3.1 滾動軸承使用條件 26
3.3.2 初選止動球軸承型號 26
3.3.3 止推軸承組配方式 26
3.3.4 止推軸承的選用計算 27
3.3.5 圓柱滾子軸承的選型計算 29
結 論 31
致 謝 33
參考文獻 34
II