基于ProE的電話機底座注塑模具設計【說明書+PROE+仿真】,說明書+PROE+仿真,基于ProE的電話機底座注塑模具設計【說明書+PROE+仿真】,基于,proe,電話機,底座,注塑,模具設計,說明書,仿單,仿真 摘要 本次設計就是以通過利用Pro/ENGEER軟件進行電話的模具設計為例，說明電腦軟件是如何縮短模具設計與制造周期的。 論文主要介紹了模具定義及作用，傳統模具設計過程，模具虛擬設計產生的背景，模具虛擬設計的定義，模具虛擬設計的作用等相關概念。并介紹了設計的主體基于Pro/ENGINEER的三維模型繪制及其環境下的模具設計方法。 最后利用以上知識在Pro/E的環境下進行電話的模具設計，并分析本次設計的技術性和經濟性。 關鍵詞：模具；模具虛擬設計；Pro/E模具設計； Abstract This design is take through carries on the telephone using the Pro/ENGEER software the mold design as an example, explained how the computer software is does reduce the mold design and the manufacture cycle. The paper mainly introduced the mold definition and the function, the traditional mold design process, the mold hypothesized design produces background, mold hypothesized design definition, mold hypothesized design function and so on related concept. And introduced the design main body based on under the Pro/ENGINEER three-dimensional model plan and the environment mold design method. Finally uses above knowledge to carry on the telephone under the Pro/E environment the mold design, and analyzes this design the technical nature and the efficiency. Key words: Die; Die virtual design; Pro/E mold design; II