《機電英語A卷新職業英語》由會員分享，可在線閱讀，更多相關《機電英語A卷新職業英語（9頁珍藏版）》請?jiān)谘b配圖網上搜索。

1、word公共外語II(機電英語)試卷A【閉卷】 須知事項：1、本試卷分第一卷試題和第二卷主觀答題卷兩局部。第一卷：1-7頁，第二卷：8-9頁。總分100分，考試時間120分鐘。2、1-10，16-45小題答案，請?zhí)钔吭诖痤}卡上，其余答案請寫在8-9頁的答題紙上。3、聽力試題在開考10分鐘后開始播音。Part I Listening (15%)Section ADirections:In this section, you will hear five short conversations. At the end of each conversation, a question will be

2、 asked about what was said. Both the conversation and question will be spoken only once. After each question, there will be a pause. During the pause, you must read the four choices marked A, B, C and D, and decide which is the best answer. Then mark the corresponding letter on Answer Sheet with a s

3、ingle line through the centre.1. A. In an office.B. In a bank.C. In a shop.D. At the post office.2.A. How to deliver the goods.B. The damage of the goods.C. The shipment of the goods.D. How to handle the goods.3.A. Los Angeles.B. Tokyo.C. Honolulu.D. New York.4.A. Making a purchase.B. After-sales se

4、rvice.C. Placing an order.D. A wrong shipment.5.A. Its a success.B. Its a different success story.C. Its beneficial to the world.D. It needs more opportunity.Section BDirections: This section is to test your ability to understand short conversations. There are 2 recorded conversations in it. After e

5、ach conversation, there are some recorded questions. Both the conversations and questions will be spoken two times. When your hear a question, you should decide on the correct answer from the 4 choices marked A, B, C and D given in your test paper. Then you should mark the corresponding letter on th

6、e Answer Sheet with a single line through the center.Conversation 16.A. To the hospital.B. To the beach.C. To his university.D. To his hometown.7.A. She visited her middle school.B. She was busy working.C. She was ill and had to stay at home.D. She was back to her hometown.Conversation 28.A. Sofas.B

7、. Tables.C. Beds.D. Bookshelves.9.A. On Main Road.B. In front of the Central Park.C. Near the terminal of Bus No. 6.D. Next to a discount store.10.A. 10%.B. 20%.C. 30%.D. 40%.Section CDirections:This section is to test your ability to prehend short passages. You will hear a recorded passage. After t

8、hat you will hear five questions. Both the passage and the questions will be read two times. When your hear a question, you should plete the answer to it with a word or a short phrase (in no more than 3 words). The questions and inplete answers are printed in your test paper. You should write your a

9、nswers on the Answer Sheet correspondingly. Now listen to the passage.11.When was the customer survey conducted?It was conducted _.12. How did customers feel about the products of the pany?The products were quite _. 13. What did customers plain about in the survey?It took_ to settle their plaints.14

10、. How did customers feel about the service staff?The service staff were not always _.15. When should the Customer Service Department e up with a plan to improve their service?_.Part II Vocabulary & Structure (15%)Directions:Each of the following sentences is provided with four choices. Choose the on

11、e that best pletes the sentence. Then mark the corresponding letter on the Answer Sheet with a single line through the center.16. The industrial revolution _ the whole structure of English society.A. impliedB. repliedC. uglifiedD. modified17.CAD enables designers _ and develop work on screen.A. to l

12、ay inB. laying inC. to lay outD. laying out18.The interview was conducted with an expert _ had a deep understanding of the gas pressor industry.A. whoB. whomC. whoseD. what19.We have developed many products that are _ used in the construction industry.A. wideB. widelyC. widthD. widen20.The _ careful

13、 you are, the _ mistakes you will make.A. less.fewerB. less.lessC. more.fewerD. more.less21. The _ of what you know will help you solve new problems.A. applyB. applicationC. applicantD. applicable22. Software is often _ as the set of instructions that make the puter work.A. depended onB. led toC. re

14、ferred toD. engaged in23.puter plotting has been extensively applied in mechanical engineering _ its high precision capability.A. due toB. mitted toC. pared toD. prior to24.It is essential that our suppliers _ both petitive in terms of price and extremely reliable.A. beB. isC. shouldD. are25.Applica

15、tion software is software _ to carry out a specific task.A. designB. designerC. designingD. designed26.Most major CAD systems are able to run on a _ of platforms.A. varyB. variedC. varietyD. various27. These panies are _ for developing technology products for international market.A. specialized B. r

16、esponsibleC. proudD. different28.The mittee made a number of _ for improving safety standards.A. mencementB. mentC. remendD. remendations29.The pany _ a survey to find out local reactions to their recently promoted product.A. conductB. conductingC. to conductD. conducted30.There are some new softwar

17、e programs currently _ for automation applications.A. availableB. adaptableC. adjustableD. acceptablePart III Reading prehension (30%)Directions:This part is to test your reading ability. There are 3 passages for you to fulfill. For each question or statement there are 4 choices marked A, B, C and D

18、. You should make the correct choice and mark the corresponding letteron the Answer Sheet with a single line through the center. Passage 1CAD is a product of the puter era. It originated from early puter graphic systems to the development of interactive puter graphics.A CAD system consists of three

19、major parts:(1)Hardware puter and input/output(I/O)devices.(2)Operating system software.(3)Application software CAD package.Hardware is used to support the software functions. A wide range of hardware is used in CAD systems. The operating system software is the interface between the CAD application

20、software and the hardware. It supervises the operation of the hardware and provides basic functions such as creating and removing operation tasks, and providing access to software resources such as files, editors, pilers and utility programs. It is important not only for CAD software, but also for n

21、on-CAD software.The application software is the heart of a CAD system. It contains programs that do 2-D and 3-D modeling, drafting, and engineering analysis. The functionality of a CAD system is built into the application software. It is application software that makes one CAD package different from

22、 another. Application software is usually operating-system-dependent. To transport a CAD system running in one operating system to another operating system is not as trivial as repiling the software. Therefore, attention must be given to the operating system as well.CAD makes possible multiview 2-D

23、drawing, with an endless possibility of views in a range of scales from microns to meters. It gives the mechanical designer the ability to magnify even the smallest of ponents to ascertain if the assembled ponents fit properly and even to design programs to identify automatically potential problems

24、in CAD assembly. Parts with different characteristics, such as movable or stationary, can be assigned different colors on the display. Parts can be dimensioned with automatic dimensioning changes, allowing for expedient engineering design changes.31. A CAD system are made up of _.A. hardware puter a

25、nd input/output devicesB. operating system softwareC. application software CAD packageD. all of the above32. _ provides basic functions such as creating and removing operation tasks.A. HardwareB. Operating systemC. Application softwareD. Input and output devices33. _ enables the mechanical designer

26、to increase even the smallest parts.A. CAD systemB. 2-D drawingC. 3-D modelingD. Hardware34. _ is trivial.A. Providing access to filesB. Creating operation tasksC. Repiling the softwareD. Transporting a system to another35. The application software includes programs which _.A. do 2-D and 3-D modelin

27、g, drafting and engineering analysisB. supervise the operation of the hardware and provide functionsC. provide access to software resources such as files and editorsD. is the interface between the CAD application software and hardwarePassage 2The Global Positioning System is a navigation system orig

28、inally developed by the US military which continues its maintenance today. During the 1980s the government opened up the use of the GPS to the private sector. It is widely expected to bee the next personal utility in the same way that cellular phones have over the past couple of decades.GPS technolo

29、gy actually consists of three separate ponents all working together. The three parts are the satellite constellation, the ground control network and the user equipment. By satellite constellation, we mean the satellites in low earth orbit which provide the signals and navigational data to the users

30、equipment. It takes each satellite 12 hours to make a plete circle around the earth. The ground control network consists of a receiver and an antenna. It continually monitors the health of the various satellites and the integrity ofthe signals received.The receiver separates the signals into differe

31、nt channels designated for a particular satellite and frequency at a particular time. The user equipment is designed to receivesignals from the satellite constellation and puter. It uses automated puter systems to retrieve and analyze data from the receiver.Todays cars, SUVs and pick-up trucks e wit

32、h a variety of extras, from passenger side airbags to the ubiquitous car alarms. Entertainment options range from high-end speakers and CD players to multiple DVD players. The GPS navigation system, however, forms the bridge between safety and entertainment features. While theyre definitely entertai

33、ning, they can also bee a must-have safety net in your travels.36.GPS is a navigation tool originally developed for _ use.A. scientificB. militaryC. naturalD. mercial37.The government opened up the GPS to private use _. A.12 hoursB. 24 years agoC.during the 1980sD.past couple of decades38._ function

34、s as the bridge between safety and entertainment features.A.GPS B.Air bagC.SpeakerD.Car alarm39.GPS prises _.A.satellite constellation, ground network and CD playersB.satellite constellation, user equipment and DVD playerC.satellite constellation, ground network and user equipmentD.ground network, u

35、ser equipment and multiple DVD player40.The user equipment _.A.separates the signals into different channels at a particular timeB.continually monitors the health of the various satellites and integrityC.provides signals and navigational data to the satellite constellationD.is to receive signals fro

36、m the satellite constellation and puterPassage 3Dear Mr. Wilson,I would like to apply for the position of Deputy Manager for R&D advertised in this weeks Shenzhen Daily.I am currently studying Automation Technology at Yuqiang Technology College and expected to graduate on July 28, 2011. Since the st

37、art of my studies I have gained theoretical as well as practical skills, especially in the fields of motion control, mechanical designing, and robotics. Furthermore, I have experience of programming as well as using CAD systems.I very much enjoy working in teams and dealing with all kinds of people.

38、 Moreover, I have a high level of self-motivation and enthusiasm, and am able to work efficiently and independently. I am keen to learn and quickly bee acquainted with new topics.Your pany particularly attracts me because of your involvement in research on robot programming technology, an area which

39、 has always been of great interest to me. The position advertised would allow me to acquire new knowledge in this field of research and give me the opportunity to gain experience in a professional team as well as to improve my English skills and explore new cultures. With the knowledge and experienc

40、e I have gained at college, I believe I would make a valuable contribution to your team. I will be available from July 30 until September 1, 2011. Please find attached my curriculum vitae. I thank you for considering my application and look forward to hearing from you.Yours sincerely, Li Tao41. The

41、passage is a letter of _.A. applicationB. invitationC. motivationD. remendation42.Mr. Wilson is probably the _ of the pany.A. supervisorB. HR managerC. client service executiveD. administrative assistant43._ is attached to the letter.A. A pictureB. CVC. A business cardD. A reference letter44.Which o

42、f the following statement about Li Tao is true?A. He cant work independently.B. Hes never used CAD systemsC. His major is automation technology.D. He graduated from college 5 years ago.45.Mr. Wilsons pany is attractive to Li Tao because _.A. he quickly bees acquainted with new topics B. he gained bo

43、th theoretical and practical skillsC. the pany advertised a position on newspaperD. the pany is involved in research on roboticsPart IV Translate the following sentences into Chinese. (20%)請把該局部的答案寫在第二卷主觀答題紙上46. puter-Aided Manufacturing(CAM) can be defined as the use of puter systems to plan, manag

44、e, and control the operations of a manufacturing plant through either direct or indirect puter interface with the plants production resources.47. At present, China has a relatively fierce petition and relatively low industry concentration in its gas pressor manufacturing industry. Chinas gas pressor

45、 producers are mainly distributed along the eastern coastal regions, while in its west region (including Southwest and Northwest) there exist huge market potentials to be further developed.Part V Writing: You are required to write a business letter in no less than 80 words based on the information g

46、iven below.(20%)請把該局部的答案寫在第二卷主觀答題紙上 假定你是Prestine Electric Limited的Bruce Martin，欲購置HP Development pany的激光打印機jet printer，于是就給該公司銷售經理David Johnson寫信。容：1. 簡單介紹本公司2. 索要產品目錄與價格表，了解售后服務情況。職業技術學院公共外語部 系 (部) 專 業 班 級 學 號 姓 名 密 封 線 內 不 要 答 題 2011-2012學年度第二學期期末考試必修公共外語II(機電英語)試卷A【閉卷】Answer Sheet 主 觀 答 題 卷題號Part

47、 IPart VPart VI總分(主觀局部)得分評卷人核分人Part I Listening prehension 得分【 】Section C 5%11._.12._.13. _.14. _.15. _.Part IV Translatethe following sentences into Chinese. (20%) 得分【 】46. 47.Part V Writing: (20%)得分【 】假定你是Prestine Electric Limited的Bruce Martin，欲購置HP Development pany的激光打印機jet printer，于是就給該公司銷售經理David Johnson寫信。 容：1. 簡單介紹本公司2. 索要產品目錄與價格表，了解售后服務情況。9 / 9