振動式螺母輸送機機械結構設計【優秀課程畢業設計含16張CAD圖紙】-jxsj40
振動式螺母輸送機機械結構設計
摘 要
螺母輸送機在生活中主要運用于車企,與焊接設備進行配套使用,這樣可以很好地杜絕安全隱患而且提高生產效率。在很多企業中,當使用通用式點焊機進行螺母與螺栓的焊接時,通常焊接壓力非常巨大,而傳統焊接時,工人用手放置焊接螺母或焊接螺栓時,常常因?yàn)殚L時間注意力不能集中或操作不當,造成手部壓傷甚至殘廢。尤其是企業大規模生產時,工人難免會產生疲憊,每年很多企業都會發生類似的生產安全事故。
振動式螺母輸送機完美的解決了這個問題,用機器運輸焊接螺母,而不再使用人工放置焊接螺母,從而實現了從螺母的輸送到電焊機的自動化。采用螺母輸送機即安全又方便,效率還很高。工人只需要將螺母放入指定地點,然后機器就會自動運行實現焊接作業,安全性大大提高,極大地優化了工作任務,縮短了工作時間,只需要少量的工人既可以完成作業,節約生產成本,而且企業實現了自動化生產,便于質量監管和生產方式管理。
關鍵詞 焊接螺母;振動式;輸送機
Mechanical Structure Design of Vibrating Nut Conveyor
Abstract
Nut conveyor in life mainly used in car prices, and supporting the use of welding equipment, which can be a good put forward the security risks and improve production efficiency. In many enterprises, when the use of general-purpose spot welding machine for welding nuts and bolts, usually the welding pressure is very large, and the traditional welding, the workers placed by hand welding nuts or welding bolts, often because of long hours of attention can not be concentrated Or improper operation, resulting in hand injuries or even disabled. Especially when large-scale production of enterprises, workers will inevitably produce fatigue, many companies each year will occur similar to the production of security incidents.
The vibrating nut conveyor perfectly solves this problem by transporting the welding nut with the machine without the use of manual placement of the welding nuts to achieve the automation of the transfer from the nut to the welder. The use of nut conveyor is safe and convenient, the efficiency is still high. Workers only need to put the nut into the designated location, and then the machine will automatically run to achieve welding operations, greatly enhance the security, greatly optimize the work tasks, shorten the working hours, only a small number of workers can complete the operation, saving production costs , And enterprises to achieve the automated production, easy to quality control and production management.
Keywords welding nuts;Vibration; Conveyor
目 錄
摘要 I
Abstract II
第1章 緒論 1
1.1 選題的目的 1
1.2 課題的意義 1
1.3 選題的國內外研究現狀 2
1.4 選題的研究方法 3
第2章 振動式輸送機概述 5
2.1 振動式輸送機的應用 5
2.2 振動式輸送機的分類及特點 5
2.3 振動式輸送機的概述 6
2.3.1 電振機的組成 7
2.3.2 振動式螺母輸送機的優缺點 7
2.4 電振機工作原理及物料輸送原理 8
2.4.1 工作原理 8
2.4.2 物料輸送原理 9
2.5 本章小結 13
第3章 振動式螺母輸送機運動計算 14
3.1 已知原始數據及工作條件 15
3.2 運動學參數的選擇和計算 15
3.3 振動系統的分析 17
3.4 彈簧的選擇 19
3.5 本章小結 19
第4章 電磁鐵與料斗的計算選擇 20
4.1 電磁鐵參數的計算選擇 21
4.2 料斗的設計 22
4.3 料斗的參數選擇 23
4.4 料斗的設計 24
4.5 本章小結 27
第5章 振動式螺母輸送機的調試 27
5.1 調試內容 28
5.2 本章小結 28
結論 29
致 謝 30
參考文獻 31
【詳情如下】【需要咨詢購買全套設計請加QQ1459919609】
側板.dwg
出料槽.dwg
參考文獻資料.ppt
總裝備圖.dwg
振動式螺母輸送機機械結構設計.doc
文件清單.txt
料斗壁.dwg
料斗底.dwg
料斗槽.dwg
板彈簧.dwg
片彈簧.dwg
電磁鐵架.dwg
箱壁.dwg
箱底.dwg
箱蓋.dwg
銜鐵.dwg
銜鐵架.dwg
防磁化鋁片.dwg
防震橡膠座.dwg