購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
編號
無錫太湖學院
畢業設計（論文）
相關資料
題目： 三角帶無級變速裝置設計
信機 系 機械工程及自動化專業
學 號： 0923059
學生姓名： 胡建義
指導教師： 唐正寧（職稱：副教授）
（職稱： ）
2013年5月25日
目 錄
一、畢業設計（論文）開題報告
二、畢業設計（論文）外文資料翻譯及原文
三、學生“畢業論文（論文）計劃、進度、檢查及落實表”
四、實習鑒定表
無錫太湖學院
畢業設計（論文）
開題報告
題目： 三角帶無級變速裝置設計
信機 系 機械工程及自動化 專業
學 號： 0923059
學生姓名： 胡建義
指導教師： 唐正寧（職稱：副教授）
（職稱： ）
2012年11月14日
課題來源
上海輕工業設計院
科學依據（包括課題的科學意義；國內外研究概況、水平和發展趨勢；應用前景等）
（1）課題科學意義
無級變速技術采用傳動帶和工作直徑可變的主、從動輪相配合來傳遞動力，可以實現傳動比的連續改變，從而得到傳動系與電機工況的最佳匹配。常見的無極變速器有液力機械式無級變速器和金屬帶式無級變速器。
無級變速器在紙長調節包裝機中是主動性的部件，無極變速器的研究幾乎成為包裝機改進的全部。能夠自動調節變速比，即調節包裝紙的輸送速度的變速器成為目前的主流。
（2） 無級變速器的研究現狀及發展前景
研究現狀：
金屬帶式無級變速器的結構、力學分析、傳動效率等，在國外已研究成熟，國外的研究熱點主要集中在CVT電液控制系統的智能PID控制、魯棒控制、模糊控制、神經網絡控制等。金屬帶式無級變速器的結構、力學分析、傳動效率等研究在國內已取得很大的進展，但CVT電液控制系統的控制策略、實驗仿真等研究在國內剛剛起步。
發展前景：
隨著電子技術、材料及加工技術的發展，無級變速器正朝著以下幾個方面發展:
①向3升以上排量的汽車上發展，以實現更廣泛的應用;
②更加優越的控制及快捷的反應;
③更低廉的價格。
研究?jī)?nèi)容
① 達到技術指標所規定的要求，滿足實際工作需要；
② 主機部件工作時定位準確，啟動無沖擊；
③ 熟練操作CAD軟件，繪制零件圖、裝配圖；
④ 掌握無級變速的調速原理及調速過程；
⑤ 學習掌握Solidworks軟件的基本操作，并繪制三維圖；
擬采取的研究方法、技術路線、實驗方案及可行性分析
（1）設計思路
通過給定的參數，首先進行總體方案設計，確定變速器各個部分的結構形式，然后對變速器各部分分別進行詳細設計和校核，確定變速器各部分的主要參數。確定參數后，用Solidworks進行各個零部件的三維建模與裝配，又根據三維模型使用CAD畫出典型零件的二維圖，同時在畫二維圖的過程中對三維模型中的不合理之處進行修改。
（2）主要設計內容
① 變速器總體方案設計；
② 典型零部件設計、校核。
研究計劃及預期成果
研究計劃：
2012年10月12日-2012年12月25日：按照任務書要求查閱論文相關參考資料，填寫畢業設計開題報告書。
2013年1月11日-2013年3月5日：填寫畢業實習報告。
2013年3月8日-2013年3月14日：按照要求修改畢業設計開題報告。
2013年3月15日-2013年3月21日：學習并翻譯一篇與畢業設計相關的英文材料。
2013年3月22日-2013年4月11日：無級變速器整體設計。
2013年4月12日-2013年4月25日：圖紙繪制。
2013年4月26日-2013年5月21日：畢業論文撰寫和修改工作。
預期成果：
達到預期的設計結果，能夠?qū)崿F(xiàn)無極變速，廣泛應用于實際生產中。
特色或創新之處
① 通過電動機的正反轉改變帶式輸送機的速度，從而達到包裝紙的長度；
② 采用固定某些參量、改變某些參量來研究問題的方法，思路清晰，簡潔明了，行之有效。
已具備的條件和尚需解決的問題
① 實驗方案思路已經非常明確，已經具備使用Solidworks的基本操作能力以及三維建模能力；
② 使用Solidworks的能力尚需加強，仿真方面仍不足。
指導教師意見
指導教師簽名：
年 月 日
教研室（學科組、研究所）意見
教研室主任簽名：
年 月 日
系意見
主管領導簽名：
年 月 日
英文原文
Stepless speed technology
Stepless speed technology USES belt and the work of the Lord diameters driven pulley, cooperated with the power to deliver, can realize the TRANSMISSION ratio of the continuous change, and get the TRANSMISSION and engine condition the best match between. Common step-less transmission have hydraulic mechanical step-less transmission and belt type step-less transmission , the current domestic market of the vehicles already more and more. Editor this section step-less transmission and the origin of the automatic transmission
Automatic transmission is easy to operate, reduce fatigue driving, born of the gear drive system, the control method, it can be divided into the hydraulic controlled hydraulic and electric automatic transmission hydraulic automatic transmission; According to the change of the transmission way and can be divided into have levels of automatic transmission and no levels of automatic transmission. Therefore, step-less transmission is actually a kind of automatic transmission, but it than common automatic transmission is much more complex, more advanced technologies. Step-less transmission and common hydraulic automatic transmission of the biggest differences is on the structure, the latter is by hydraulic control gear drive system structure, still have the gears, it can be realized in between the two block is continuously variable transmission , and is two groups plate and a belt speed of than traditional automatic transmission, simple structure, smaller. In addition, it is free to change gear ratios, so as to realize the full speed stepless speed change, make more smoothly, without the traditional transmission shift at the "" feeling. Editor this section step-less transmission classification
To realize stepless speed, driving mode can be adopted according to the liquid transmission, power transmission and mechanical drive three ways.
Liquid transmission
Liquid transmission is divided into two kinds: one kind is hydraulic, mainly is composed by the pump and motor or the valve and pump variable speed of transmission device, apply to small and medium-sized power transmission. Another kind is hydraulic type, adopts hydraulic coupler or hydraulic torque of variable speed drive, used in high power (kw). To hundreds of thousands of The main characteristics of liquid transmission is: speed range, can absorb the impact and big to prevent transmission efficiency high, overload, long life, easy to realize automation: manufacturing precision demand is high, the price is more expensive, output characteristics for constant torque, sliding rate is bigger, running vulnerable to leak.
Power transmission
Power transmission basically is divided into three categories: one kind is electromagnetic sliding type, it is in the asynchronous motor installed in electromagnetic clutch, sliding by changing its exciter current to speed, this belongs to a kind of relatively backward speed adjustment way. The characteristics of simple structure, low cost, convenient operation and maintenance, sliding, low efficiency, biggest fever, not suitable for long-term serious load operation, the general used only for small power transmission. Second is the dc motor type, changes in the magnetic flux or change the armature voltage realize the speed. Its characteristic is speed range, high precision, large and complex, high cost but equipment, maintenance difficulties, are used for medium power range (dozens to hundreds of kw), has gradually been ac motor type instead. Three kinds of ac motor type is, through the change pole, pressure control and frequency conversion for the speed. The most practical application for variable frequency speed regulation, namely deserve using a horns, and then get luffing power drive motor variable speed. Its characteristic is the speed performance is good, range, high efficiency, it can automatic control, small volume, it is suitable for a wide range of power: mechanical properties in single reducing speed constant torque, low efficiency and low speed running smooth enough, the price is higher, maintenance should be professional. In recent years, frequency converter as an advanced, excellent variable speed device rapid development of machinery, step-less transmission produced a certain impact.
Mechanical transmission
The main characteristic of the mechanical transmission is stable, rotate speed sliding rate, reliable, and has small constant power mechanical properties, the transmission efficiency is high, and simple structure, convenient maintenance, the price is relatively cheap; But parts processing and lubrication to demand higher bearing capacity, low resistance, resistance to impact overload and poor, so general suitable for medium and small power transmission.
1, MT
The manual transmission (MT: Manual Transmission) gearset, because the number of teeth of each gear is fixed, each gear ratio is a fixed value (that is, the so-called "level"). For example, a block ratio of 3.455, the second gear is 2.056 to the five-speed 0.85, these figures are multiplied by the main reduction ratio is the total transmission ratio of the power train, 5-speed transmission 5 value (ie 5 level), so it is a step-variable transmission. The manual transmission is the most common transmission, composed of relatively AT and CVT, its structure is simple, the main axis of the input shaft, output shaft and the intermediate shaft, the shaft bearings, each gear, the synchronizer, the shift operating mechanism. Manual transmission failure rate is relatively low, the use of lower cost.
2, AT
Automatic transmission (AT: Automatic Transmission) automatic upshifts and downshifts lifting gear control, computer based primarily on speed and load (throttle pedal stroke), but also refer to a variety of signal transmission oil temperature, shift mode. The same point of the AT and MT both step-variable transmission, only that the AT has a continuous speed ratio variation in the respective gear, and the speed according to the vehicle speed automatically to achieve a gear change for hand can be eliminated block cars "frustrated" variable block feeling. (1) AT structure: Compared with manual wave, hydraulic automatic transmission (AT) are very different in structure and use. Manually waves mainly composed of gears and shafts, variable speed torque generated by different gear combinations; AT by the torque converter, a planetary gear and the hydraulic steering system, to achieve a variable speed hydraulic transmission and gear combination moment. Wherein the torque converter is the most characteristic parts of the AT, it is composed by the pump impeller, turbine and guide wheel member, directly enter the engine power transmitting torque and clutch effect. (2) AT advantages and disadvantages: AT without a clutch shift, gear changes less stable connection, so the operation is easy, both to car, bring comfort to the car. But the disadvantage is also one of the speed changes in response to slow, there is no manual transmission is sensitive, so many play car owners like to open a manual transmission car; Second, the economic cost of oil, the transmission efficiency is low variable torque range is limited, in recent years, the introduction of electronic control technology improve this problem; institutional complex, difficult to repair. High-Speed ??circulating within the torque converter hydraulic oil will generate heat, so as to use the specified high temperature hydraulic oil. In addition, if the car can not be started due to battery power shortage, you can not start with a truck or trailer bed. Hauling fault car, pay attention to the drive wheels off the ground to protect the Automatic gear from damage. (3) AMT AMT transformation, major changes in the mechanical transmission (manual transmission) based on the original manual shift control section. In the case of the overall transmission structure constant through the installation of computer-controlled robotic systems to achieve the automation of the shift. AMT is actually a robot system to complete the two movements operating the clutch and the gear selector. AMT is the production of manual wave based on the transformation, production inheritance, investment responsibility with lower production plant. AMT's core technology is computer-controlled, electronic technology and quality will directly determine the quality of the performance and operation of the AMT.
3, the CVT
The continuously variable transmission (CVT: Continuous Variable Transmission) with a step-type main difference in that: it is the speed ratio is not interrupted, but a series of discrete values, for example, has been changing from 3.455 to 0.85. CVT structure is simpler than conventional automatic transmission, smaller, neither many manual transmission gear pair, there is no automatic transmission complex planetary gear set, it depends mainly on the main driven wheel and metal band or wheel dial to achieve the speed ratio stepless change. Its principle is as several sets of gear sizes watched under the control of an aggregate with a common gearbox, and a different speed ratio, like a bicycle pedal driven by the size of the wheel and the chain wheels to rotate at different speeds. Also changes due to the different strength of the thrust generated by each group gear sizes, resulting in the transmission output speed, in order to achieve the bradycardia rotation, regardless of grade. CVT belts and variable-width ratchet power transmission, i.e., when the ratchet wheel changes the groove width of the elbow, corresponding to the shift change the contact radius of the drive wheel and the driven wheel on the driving belt, a belt ships with a rubber band, metal band and metal chain. CVT is truly stepless, it is light weight, small size, fewer parts, and AT has a high operating efficiency, lower fuel consumption. CVT disadvantage is obvious, is the transmission belt can be easily damaged, can not withstand a greater load, low power and low torque vehicles can only be restricted to about 1 liter of displacement, so the share of the automatic transmission 4. After the major car companies vigorously research in recent years, the situation has improved. CVT will be the development direction of the automatic transmission. Domestic vehicle models equipped with the CVT, such as the Nissan Teana, Sylphy, X-Trail full range of models, FAW-Volkswagen, Audi, the Guangqi Honda Fit, South Fiat Siena, Pa Baclofen, Chery Cowin.
The main structure and working principle of the CVT (1) steel belt CVT
The CVT is a combination of pulleys and a steel strip, power is transmitted to replace the conventional gear device. The main components of the basic member of the including capstan group, a driven wheel set, a metal band, and a hydraulic pump, etc.. Metal band by the two beams of metal rings and hundreds of sheet metal. Capstan group and a driven wheel set by the movable disc and the fixed rent, close to one side of the pulley and the cylinder can slide on the shaft, the other side is fixed. Movable plate and the fixed plate cone structure, the cone forming a V-groove to engage with the V-shaped metal transmission belt. The power output of the engine output shaft is first passed to the capstan of the CVT, and then is transmitted to the driven wheel through a V-type power transmission belt, and finally via the gear unit, the differential is transmitted to the wheels to drive the car. Through the capstan and the driven wheel when the movable disc for axial movement to change the working radius of the capstan and the tapered surface of the driven pulley with a V-type drive belt engaging, thereby changing the transmission ratio. The amount of axial movement of the movable platen is needed by the driver through the control system to adjust the capstan, the follower wheel cylinder of the hydraulic pump pressure to achieve. Continuously adjusted in order to achieve a continuously variable transmission can be achieved due to the working radius of drive pulley and driven pulley. In the the CVT hydraulic system, the role of the slave cylinder to control the tension of the metal band, in order to ensure the efficient and reliable
delivery of power from the engine. Active cylinder to control the position of the driving bevel wheel moves axially along the V-groove move in the the capstan group metal band, due to the constant length of the metal strip, a group of the driven wheel in the opposite direction on the metal strip along the V-groove changes. Change the radius of gyration of the metal strip in the the capstan group and a driven wheel set on the continuous variation of the speed ratio. When the car is started, the small working radius of the driving wheel, the transmission can get a larger gear ratio, thus ensuring the drive axle to have enough torque to ensure the car has a higher acceleration. As the speed increases, the capstan working radius is gradually reduced, the working radius of the driven wheel increases accordingly, and the CVT transmission is decreased so that the car can travel at higher speeds.
(2) wheel rotary CVT
Can be used to deliver more power and torque applicable in a larger displacement automobiles. This CVT combination of turntable and roller transfer drive torque and change the transmission ratio. It is changed by moving the power roller transmission ratio, input dial to the power roller force is applied in a timely manner, so that CVT gear ratio change of the reaction faster than the strip-type CVT, in order to achieve the driver's accelerator input of the transmission ratio changes linearly. In addition, similar to the strip-drive CVT, the continuous change of the transmission ratio so that the driver can enjoy seamless smooth shifting, without any shift shock.
Engine power transmitted to an input dial input dial to the rotational movement of the transmitting power to the wheel, and then passed through the rollers to the output of the turntable. By continuously changing the inclination angle of the power roller, CVT performs a smooth and continuous gear ratio changes. The size of the contact circle between the points of contact between the input wheel and the power roller circle size and the output of the dial and the power roller is changed according to the change of the inclination angle of the power roller. The size ratio of the circle corresponding to the input the turntable and output rotational speed ratio of the turntable, the rotational speed ratio is equal to the drive ratio. When the the output dial circle is larger, the rotation of the output dial slower than the input dial, which is equivalent to the traditional low-end of the transmission. Conversely, output dial circle small, the rotation of the output dial faster than the input dial, which is equivalent to the high-end of the traditional transmission.
The momentum wheel is supported on the trunnion connected above and below the assembly and the hydraulic servo piston can move up and down.
Power roller, this configuration allows each roller rotating around the trunnion.
When the power roller axis through the wheel center, does not produce the force of the tilt of the wheel. Accordingly, since the wheel tilt remains unchanged, it is no change in the transmission ratio.
Since the high-speed rotation of the turntable, as long as the wheel moves up or down. 0.1mm to 1.0mm, can be tilted. This immediate response to a gear ratio change instruction, the EXTROID CVT cause particularly rapid transmission ratio change.
The inclination angle of the power roller hydraulic mechanism for manipulation. Despite the transmission ratio is changed by tilting the power roller, but not directly to the wheel afterburner. Instead, the force generated using the turntable so that the inclined roller when the vertical movement of the wheel from the center axis, the turntable on the roller tilt. As the high-speed rotary dial, dial the forces generated by the wheel movement and force the hours immediately tilt, so we can quickly feel the transmission ratio changes significantly. When the driver's accelerator input, and the linear acceleration and deceleration.
中文譯文
無級變速器
無級變速技術，它采用傳動帶和工作直徑可變的主、從動輪相配合來傳遞動力，可以實現傳動比的連續改變，從而得到傳動系與發動機工況的最佳匹配。常見的無級變速器有液力機械式無級變速器和金屬帶式無級變速器
自動變速器，按齒輪變速系統的控制方式，它可以分為液控液壓自動變速器和電控液壓自動變速器；按傳動比的變化方式又可分為有級式自動變速器和無級式自動變速器。因此，無級變速器實際上是自動變速器的一種，但它比常見的自動變速器要復雜得多，技術上也更為先進。
無級變速器與常見的液壓自動變速器最大的不同是在結構上，后者是由液壓控制的齒輪變速系統構成，還是有擋位的，它所能實現的是在兩擋之間的無級變速，而無級變速器則是兩組變速輪盤和一條傳動帶組成的，比傳統自動變速器結構簡單，體積更小。另外，它可以自由改變傳動比，從而實現全程無級變速，使車速變化更為平穩，沒有傳統變速器換擋時那種“頓”的感覺。
為實現無級變速，按傳動方式可采用液體傳動、電力傳動和機械傳動三種方式。
液體傳動
液體傳動分為兩類：一類是液壓式，主要是由泵和馬達組成或者由閥和泵組成的變速傳動裝置，適用于中小功率傳動。另一類為液力式，采用液力耦合器或液力矩進行變速傳動，適用于大功率（幾百至幾千千瓦）。 液體傳動的主要特點是：調速范圍大，可吸收沖擊和防止過載，傳動效率較高，壽命長，易于實現自動化：制造精度要求高，價格較貴，輸出特性為恒轉矩，滑動率較大，運轉時容易發生漏油。
電力傳動
電力傳動基本上分為三類：一類是電磁滑動式，它是在異步電動機中安裝一電磁滑差離合器，通過改變其勵磁電流來調速，這屬于一種較為落后的調速方式。其特點結構簡單，成本低，操作維護方便：滑動最大，效率低，發熱嚴重，不適合長期負載運轉，故一般只用于小功率傳動。 二類是直流電動機式，通過改變磁通或改變電樞電壓實現調速。其特點是調速范圍大，精度也較高，但設備復雜，成本高，維護困難，一般用于中等功率范圍（幾十至幾百千瓦），現已逐步被交流電動機式替代。 三類是交流電動機式，通過變極、調壓和變頻進行調速。實際應用最多者為變頻調速，即采用一變幅器獲得變幅電源，然后驅動電動機變速。其特點是調速性能好、范圍大、效率較高，可自動控制，體積小，適用功率范圍寬：機械特性在降速段位恒轉矩，低速時效率低且運轉不夠平穩，價格較高，維修需專業人員。近年來，變頻器作為一種先進、優良的變速裝置迅速發展，對機械無級變速器產生了一定的沖擊。
機械傳動
機械傳動的特點主要是：轉速穩定，滑動率小，工作可靠，具有恒功率機械特性，傳動效率較高，而且結構簡單，維修方便，價格相對便宜；但零部件加工及潤滑要求較高，承載能力較低，抗過載及耐沖擊性較差，故一般適合于中、小功率傳動。
1、MT
手動變速器（MT：Manual Transmission）采用齒輪組，由于每擋齒輪組的齒數是固定的，所以各擋速比是個固定值（也就是所謂的“級”）。比如，一擋速比是3.455，二擋是2.056，再到五擋的0.85，這些數字再乘上主減速比就是汽車動力傳動系統的總傳動比，5擋變速器共有5