2353 車床上料機械手結構設計,車床,機械手,結構設計 河南理工大學萬方科技學院本科畢業設計（論文）中期檢查表指導教師： 楊志波 職稱： 副教授 所在院（系）： 機械與動力學院 教研室（研究室）： 機制教研室 題 目 車床上料機械手結構設計學生姓名 廖祥磊 專業班級 08 機制 2 班 學號 0828070129一、選題質量：（主要從以下四個方面填寫：1、選題是否符合專業培養目標，能否體現綜合訓練要求；2、題目難易程度；3、題目工作量；4、題目與生產、科研、經濟、社會、文化及實驗室建設等實際的結合程度）所選題目符合專業培養目標，能夠體現綜合訓練要求；該題目略有難度，工作量比較大；題目與生活貼近，能夠解決一定的現實問題，該畢業設計不僅能加強專業知識和技能，同時更能夠為今后進入該行業做好準備，及時的發現不足，為今后的事業打下基礎，開發的成品網站也能夠為同學們今后溝通感情提供一個有效的平臺。2、開題報告完成情況：1、在指導老師的建議下，查閱并翻閱了大量有關機械手的資料，了解了于此有關的問題的最新資料，并將收集到的資料及相關信息整理備用；2、初步完成定稿；3、在實習中收集、分析原始資料，確定設計方案、確定結構；4、合理設計了動力系統和控制單元系統；5、完成 PLC 程序的設計。2三、階段性成果：1、開題報告已經完成，并已經交給指導老師檢查且合格；2、各個零部件的選擇已經完成，零部件的選擇均是按照相關標準進行，現正在對各零部件進行計算和校核；3、圖紙繪制工作已經接近尾聲，現正對圖紙進行檢查和修改以確保最終圖紙無誤。四、存在主要問題：1.某些觀點和見解尚未成熟，理論與研究方法存在一些問題，待進一步查閱相關資料；2 就問題有針對性地查閱相關資料，還需要進行修改完善；3 論證的邏輯不夠嚴密，沒有詳細實際的數據；4 文章的語言文字生澀，有一些錯別字，病句，格式不夠規范；5 圖紙繪畫的不標準，標注不夠清楚，對繪圖軟件不熟練。五、指導教師對學生在畢業實習中，勞動、學習紀律及畢業設計（論文）進展等方面的評語：指導教師： （簽名）年 月 日河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告1河南理工大學萬方科技學院畢業實習報告專業：機械設計制造及其自動化班級：08 機制—2 班姓名：廖祥磊學號：0828070129河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告2指導老師：楊志波目錄一、實習目的及意義二、實習任務三、實習時間四、實習地點五、實習企業概況六、實習內容七、畢業設計準備八、總結與評價九、參考文獻河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告3一、實習目的及意義機械設計制造及其自動化專業是一門實踐性很強的專業，畢業實習是本科教學計劃中非常重要的一個教育環節，是學生在校學習期間理論聯系實際、增長實踐知識、培養自身各方面能力的重要手段和方法。通過實習了解本專業發展前沿，涉獵相關學科知識，使機械設計制造及其自動化專業的學生初步具有科學研究與解決工程實際問題的能力、較強的實踐動手能力和創新意識的高級應用型人才。畢業實習是大學本科專業學習中不可缺少的重要部分，通過一段時間的生產實習后，使自己具備足夠的技能，應付將來市場的挑戰并保持強勁的競爭力，并為下一步的畢業設計打下堅實的基礎。二、實習任務認真學習實習大綱，提高對實習的認識，做好思想準備；認真完成實習內容，按規定記實習筆記，撰寫實習報告，收集相關資料；三、實習時間 2012 年 2 月至 2012 年 3 月四、實習地點 鄭州市紅星機械廠五、實習企業概況鄭州中原金山機械廠是專業的水磨石機、水磨石設備廠家，水磨石磚機等新型建材設備開發制造的專業生產廠家。 金山機械廠的產品設計充分吸收國內外先進技術水平，并考慮中國國情，將國外先進的制造工藝技術、質量控制技術和中國知名企業的嚴格管理制度相結合，關鍵的電控元器件和液壓、氣動部件采用國際知名品牌和優質產品，以保證向客戶提供質量優良、運行可靠的設備，保證客戶以最小的投資獲取最大的利益。金山機械廠作為水磨石機的專業生產廠家，已建立起金山特色的科研、生產、銷售、服務體系，彩瓦機、彩磚機、磨石磨磚機、藝術圍欄機、石材設備系列產品，用戶遍布全國，出口國外許多國家。理念：誠信、優質、創新誠信：對員工真誠，對客戶真誠，重合同、守信譽。優質：擁有優質的員工，向社會提供優質的產品、技術、服務，向職工提供優質的工作環境和福利待遇。創新：追求技術不斷進步，產品的不斷更新，服務的不斷完善。理念：誠信、優質、創新......河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告4六、實習內容（一）實習的具體內容我是 2012 年 2 月來到河南省鄭州市中原金山機械廠的，接待我們的是人事部的孫經理，初次見面，就感覺孫經理是位很和藹、很親切的領導。而在接下來的日子里的接觸也證實了這點。我們被安排在動力部實習，動力部主要是負責機械維護及其機械維修方面的工作。我們也主要是學習這些方面的知識和相關的工作經驗。剛來的時候，我們畢竟沒有什么經驗，只能跟著師傅學習，在對公司機器修理及維護過程中，自己認真觀察各種機器，最直接的就是工藝。對我們即將畢業的人來說，這方面還是很好辦的。后面，由于對機器有了了解，我能對產品加工中特定的工藝動作怎么實現的進行思考。這樣能加速學習理解和知識的積累。因為我們要常進車間去，所以多車間的生產狀況也都有一個大概的了解。金山主要是水磨石機器,水泥瓦機，水磨石磚機,水磨石設備,水磨石機，這其中給我印象最深刻的是成品車間，主要是因為這個車間的設備最容易出現故障，可能是因為它里面的設備比較陳舊吧。當然其他車間有些東西也是要時常要更換的。 這是第一次正式與社會接軌踏上工作崗位，開始與以往完全不一樣的生活。每天在規定的時間上下班，上班期間要認真準時地完成自己的工作任務，草率敷衍了事。凡事得謹慎小心，否則隨時可能要為一個小小的錯誤承擔嚴重的后果付出巨大的代價，再也不是一句對不起和一紙道歉書所能解決。工作中我發現做任何事不能單蠻干，應合理應用各種常識來解決問題，同時也要注意團隊合作。任何一個廠都有一套嚴格緊密的生產體系，在體系中每個環節都是緊緊相扣，每個環節的工作人員都應該嚴格遵守規章制度。年輕不是用來揮霍的，而是我們拼搏的資本。我不想碌碌無為終了此生。我想有個幸福的家庭和人生。所以我會一直朝著我的目標走去。保持一顆樂觀豁達，積極進取的心，對生活充滿希望，相信“蒼天不負有心人”。河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告5（二）實習中資料的收集與總結1 鑄造 按曲軸鑄造工藝進行2 熱處理 正火3銑兩端面總長為 265mm 銑床4車兩端工藝搭子外圓直徑 φ45mm 車床5鉆主軸頸中心孔車床6鉆連桿軸頸中心孔正對連桿中心7 檢驗河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告68粗車三個連桿軸頸留余量 2.6mm 車床七、畢業設計準備一、機械手的工作原理（一）機械手的概述機械手是在機械化、自動化生產過程中發展起來的一種新型裝置。近年來，隨著電子技術特別是電子計算機的廣泛應用，機器人的研制和生產已成為高技術領域內迅速發展起來的一門新興技術，它更加促進了機械手的發展，使得機械手能更好地實現與機械化和自動化的有機結合。機械手雖然目前還不如人手那樣靈活，但它具有能不斷重復工作和勞動、不知疲勞、不怕危險、抓舉重物的力量比人手大等特點，因此，機械手已受到許多部門的重視，并越來越廣泛地得到了應用，例如：（1）機床加工工件的裝卸，特別是在自動化車床、組合機床上使用較為普遍。（2）在裝配作業中應用廣泛，在電子行業中它可以用來裝配印制電路板，在機械行業中它可以用來組裝零部件。（3）可在勞動條件差，單調重復易子疲勞的工作環境工作，以代替人的勞動。（4）在危險場合下工作，如軍工品的裝卸、危險品及有害物的搬運等。（5）宇宙及海洋的開發。（6）軍事工程及生物醫學方面的研究和試驗。（二）機械手的工作方式機械手電氣控制系統，除了有多工步特點之外，還要求有連續控制和手動控制等操作方式。工作方式的選擇可以很方便地在操作面板上表示出來。當旋鈕打向回原點時，系統自動地回到左上角位置待命。當旋鈕打向自動時，系統自動完成各工步操作，且循環動作。當旋鈕打向手動時，每一工步都要按下該工步按鈕才能實現。以下是設計該機械手控制程序的步驟和方法。河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告71、機械手傳送工件系統示意圖，如圖 1 所示。圖 1 機械手傳送示意及操作面控制器如圖 1 所示機械手能實現手動、回復位、單步、單周期和連續等五種工作方式。手動工作方式時，用各按鈕的點動實現相應的動作；回復位工作方式時，按下“回復位”按鈕，則機械手自動返回原位；單步工作方式時，每按一次起動按鈕機械手向前執行一步；選擇單周期工作方式時，每按一次起動按鈕，機械手只運行一個周期就停下；連續工作方式時，機械手向前執行一步；只要按下起動按鈕，機械手就會連續循環動作，直到按下停止按鈕，機械手才會最后運行到原位并停下；而在傳送工件的過程中，機械手必須升到最高位置才能左右移動，以防止機械手在較低位置運行時碰到其它工件。圖 2 機械手傳送示意及操作動作傳送圖河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告8圖 3 機械手傳送示意及操作動作執行圖如圖 2，3、其功能是將工件從 A 移送到 B 處。氣動機械手的升降和左右移動分別使用了雙線圈的電磁閥，在某方向的驅動線圈失電時能保持在原位，必須驅動反方向的線圈才能反向運動。上升、下降對應的電磁閥線圈分別是 YV2、YV1，右行、左行對應的電磁閥線圈分別是 YV3、YV4。機械手的夾鉗使用單線圈電磁閥 YV5，線圈通電時夾緊工件，斷電時松開工件。通過設置限位開關 SQ1、SQ2、SQ3 、SQ4 分別對機械手的下降、上升、右行、左行進行限位，而夾鉗不帶限位開關，它是通過延時 1.7s 來表示夾緊、松開動作的完成的。二、機械手控制的硬件設計（一）輸入和輸出點分配表及原理接線圖表 1 機械手傳送系統輸入和輸出點分配表名 稱 代號 輸入 名 稱 代號 輸入 名 稱 代號 輸出啟動 SB1 X0 夾緊 SB5 X10 電磁閥下降 YV1 Y0下限行程 SQ1 X1 放松 SB6 X11 電磁閥夾緊 YV2 Y1上限行程 SQ2 X2 單步上升 SB7 X12 電磁閥上升 YV3 Y2右限行程 SQ3 X3 單步下降 SB8 X13 電磁閥右行 YV4 Y3左限行程 SQ4 X4 單步左移 SB9 X14 電磁閥左行 YV5 Y4河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告9停止 SB2 X5 單步右移 SB10 X15 原點指示 EL Y5手動操作 SB3 X6 回原點 SB11 X16連續操作 SB4 X7 工件檢測 SQ5 X17表 1 機械手傳送系統輸入和輸出點分配表圖 3、機械手硬件控制連線圖（二）控制程序操作系統操作系統包括回原點程序，手動單步操作程序和自動連續操作程序，如圖 3 所示。河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告10圖 4、機械手操作系統程序其原理是：把旋鈕置于回原點，X16 接通，系統自動回原點，Y5 驅動指示燈亮。再把旋鈕置于手動，則 X6 接通，其常閉觸頭打開，程序不跳轉（CJ 為一跳轉指令，如果 CJ 驅動，則跳到指針 P 所指 P0 處） ，執行手動程序。之后，由于 X7 常閉觸點，當執行 CJ 指令時，跳轉到P1 所指的結束位置。如果旋鈕置于自動位置， （既 X6 常閉閉合、X7 常閉打開）則程序執行時跳過手動程序，直接執行自動程序。回原位程序回原位程序如圖 4 所示。用 S10~S12 作回零操作元件。應注意，當用 S10~S19 作回零操作時，在最后狀態中在自我復位前應使特殊繼電器 M8043 置 1。河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告11圖 5、回原位狀態轉移圖手動單步操作程序如圖 5 所示。圖中上升/下降，左移/右移都有聯鎖和限位保護。圖 6、手動單步操作程序河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告12自動操作程序自動操作狀態轉移見圖 6 所示。當機械手處于原位時，按啟動 X0 接通，狀態轉移到 S20，圖 7、自動操作狀態轉移圖驅動下降 Y0，當?shù)竭_(dá)下限位使行程開關 X1 接通，狀態轉移到 S21，而 S20 自動復位。S21 驅動 Y1 置位，延時 1 秒，以使電磁力達到最大夾緊力。當 T0 接通，狀態轉移到 S22，驅動 Y2 上升，當上升到達最高位，X2 接通，狀態轉移到 S23。S23 驅動 Y3 右移。移到最右位，X3 接通，狀態轉移到 S24 下降。下降到最低位，X1 接通，電磁鐵放松。為了使電磁力完全失掉，延時 1 秒。延時時間到，T1 接通，狀態轉移到S26 上升。上升到最高位，X2 接通，狀態轉移到 S27 左移。左移到最左位，使 X4 接通，返河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告13回初始狀態，再開始第二次循環動作。在編寫狀態轉移圖時注意各狀態元件只能使用一次，但它驅動的線圈，卻可以使用多次，但兩者不能出現在連續位置上。因此步進順控的編程，比起用基本指令編程較為容易，可讀性較強。7、機械手傳送系統梯形圖如圖 7 所示。圖中從第 0 行到第 27 行為回原位狀態程序。從第 28 行到第 66 行，為手動單步操作程序。從第 67 行到第 129 行為自動操作程序。這三部分程序（又稱為模塊）是圖 3 的操作系統運行的。回原位程序和自動操作程序。是用步進順控方式編程。在各步進順控末行，都以 RET結束本步進順控程序塊。但兩者又有不同?；卦怀绦虿荒茏詣臃祷爻跏紤B(tài) S1。而自動操作程序能自動返回初態 S2。三、梯形圖及指令表（一） 梯形圖自動方式初始狀態狀態轉移開始下降狀 態 轉 移 開 始 下限位夾緊上升上限位右移河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告14右移限位下降下限位放松夾緊上升上限位夾緊左行左行限位松開下降下降結束下降限位河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告15圖 8、機械手傳送系統梯形圖（二）指令表回原位初始狀態上升上升 1/2 限位翻轉下降右移右移限位河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告16八、總結與評價機械手的控制對于很多場合需求很大，不論是機床使用的小型系統還是流水線上的這類設備，其基本動作要求類似，所以控制的實現也可以相互借鑒。對于控制程序的編寫，這里給出的只是一種實現手段，使用可編程控制器還有其河南理工大學萬方科技學院機械設計制造及其自動化專業實習報告17他的方法可以實現這樣的控制，針對所用的具體系統的情況，設計人員可以選用不同的方法來編寫程序。機械手高效的工作效率，準確的定位精度，以及簡單的結構及控制方式是人手不能替代的，機械手的使用也將越來越廣泛。九、參考文獻[1] 鄔依林等：非接觸式 IC 卡在酒店收費系統中的應用[J]，佛山科學技術學院學報(自然科學版)，2002.[2] 金偉正等：基于非接觸式 IC 卡、考勤機的研究[J]，武漢工業學院學報，2001。[3] 馬秀麗等：一種非接觸式射頻卡、基站讀寫電路的設計與應用[J]，金卡工程，2003。[4] 鄔依林等：基于非接觸式 IC 卡收費機的設計[J]。廣東教育學院學報，2OO4。[5].何立民：單片機應用系統設計，北京，北京航空航天大學出版社,1995。[6] 周航慈：單片機程序設計技術，北京，北京航空航天大學出版社.1992。[7] 沈宇超等：射頻識別技術及其發展現狀，電子技術應用，1999。[8] 汪建主編：MCS 一 96 系列單片機原理及應用技術[M]，武漢：華中科技大學出版社(第 2 版)，2004。[9] 沈宇超等：射頻識別技術及其發展現狀[J]，電子技術應用，1999。[10] 李琚門：感應式 IC 卡系統及其應用[J]，電子產品世界，2000。河南理工大學萬方科技學院本科畢業論文摘　　要本課題是為普通車床配套而設計的上料機械手。工業機械手是工業生產的必然產物，它是一種模仿人體上肢的部分功能，按照預定要求輸送工件或握持工具進行操作的自動化技術設備，對現實工業生產自動化，推動工業生產的進一步發展起著重要的作用。因而具有強大的生命力受到人們的廣泛重視和歡迎。實踐證明，工業機械手可以代替人手的繁重勞動，顯著減輕了工人的勞動強度，改善勞動條件，提高勞動生產率和自動化水平。工業生產中經常出現的笨重工件的搬運和長期頻率、單調的操作，采用機械手是有效的。此外，它能在高溫、低溫、深水、宇宙、放射性和其他有毒、污染環境條件下進行操作，更現實其優越性，有著廣泛的發展前途。本課題通過應用 autoCAD 技術對機械手進行總體方案設計和液壓傳動原理設計，確定了機械手的坐標形式和自由度，確定了機械手的技術參數。同時，設計了機械手的夾持手部結構，設計了機械手的手腕結構，設計了機械手的手臂結構。他能實際自動上料運動，上料機械手的運動速度是按著滿足生產率的要求來設定。關鍵詞：機械手；手部設計；結構設計；河南理工大學萬方科技學院本科畢業論文IAbstractThis topic is designed for ordinary lathe supporting the feeding manipulator. Industrial manipulator is the inevitable outcome of the industrial production, it is a kind of imitation upper part of the body, according to the predetermined requirement function of conveying work-piece or operated holding tools to reality technical equipment, automation, promote industrial production automation of the further development of industrial production plays an important role. Thus has strong vitality wide attention by the people and welcome. Practice has proved, industrial robots can replace the hands of heavy labor, significantly reduce the labor intensity of the workers, improve working conditions, and improve labor productivity and automation level. Industrial production in the bulky workpiece often appear handling and long-term frequency, drab operation, using manipulator is effective. In addition, it can be in high temperature, low temperature and deep water, the universe, radioactive and other toxic, environmental pollution condition of operation, the more realistic its superiority, has wide development prospect This topic through the application of manipulator in overall autoCAD 河南理工大學萬方科技學院本科畢業論文IItechnology design and hydraulic transmission principle design of manipulator, sure, and freedom coordinates determined the technical parameters of manipulator. Meanwhile, the design of clamping manipulator hand structure, design of manipulator wrist structure, design of manipulator arm structure. He can actual automatic feeding movement of the manipulator, feeding velocity according to satisfy the requirement is set to productivity. KeyWords：manipulator ；handing structure ；structure design河南理工大學萬方科技學院本科畢業論文1外文資料與中文翻譯外文資料：Visualization of PLC Programs using XMLM. Bani Younis and G. FreyJuniorprofessorship Agentenbased AutomationUniversity of KaiserslautemP. 0. Box 3049, D-67653 Kaiserslautem, GermanyAbstract - Due to the growing complexity of PLC programs there is an increasing interest in the application of formal methods in this area. Formal methods allow rigid proving of system properties in verification and validation. One way to apply formal methods is to utilize a formal design approach in PLC programming. However, for existing software that has to be optimized, changed, or ported to new systems .There is the need for an approach that can start from a given PLC program. Therefore, formalization of PLC programs is a topic of current research. The paper outlines a re-engineering approach based on the formalization of PLC programs. The transformation into a vendor independent format and the visualization of the structure of PLC programs is identified as an important intermediate step in this process. It is shown how XML and corresponding technologies can be 河南理工大學萬方科技學院本科畢業論文2used for the formalization and visualization of an existing PLC program.I. INTRODUCTIONProgrammable Logic Controllers (PLCs) are a special type of computers that are used in industrial and safety critical applications. The purpose of a PLC is to control a particular process, or a collection of processes, by producing electrical control signals in response to electrical process- related inputs signals. The systems controlled by PLCs vary tremendously, with applications in manufacturing, chemical process control, machining, transportation, power distribution, and many other fields. Automation applications can range in complexity from a simple panel to operate the lights and motorized window shades in a conference room to completely automated manufacturing lines.With the widening of their application horizon， PLC programs are being subject to increased complexity and high quality demands especially for safety-critical applications. The growing complexity of the applications within the compliance of limited development time as well as the reusability of existing software or PLC modules requires a formal approach to be developed [I]. Ensuring the high quality demands requires verification and validation procedures as well as analysis and simulation of existing systems to be carried out [2]. One of the important fields for the formalization of PLC programs that have been growing up in recent time is Reverse-engineering [3]. Reverse Engineering is a process of evaluating something to 河南理工大學萬方科技學院本科畢業論文3understand how it works in order to duplicate or enhance it. While the reuse of PLC codes is being established as a tool for combating the complexity of PLC programs, Reverse Engineering is supposed to receive increased importance in the coming years especially if exiting hardware has to be replaced by new hardware with different programming environmentsVisualization of existing PLC programs is an important intermediate step of Reverse Engineering. The paper provides an approach towards the visualization of PLC programs using XML which is an important approach for the orientation and better understanding for engineers working with PLC programs. The paper is structured as follows. First, a short introduction to PLCs and the corresponding programming techniques according to the IEC 61131-3 standard is given. In Section Ⅲ an approach for Re-engineering based on formalization of PLC programs is introduced. The transformation of the PLC code into a vendor independent format is identified as an important first step in this process. XML and corresponding technologies such as XSL and XSLT that can be used in this transformation are presented in Section IV. Section V presents the application of XML for the visualization of PLC programs and illustrates the approach with an example. The final Section summarizes the results and gives an outlook on future work in this ongoing project.Ⅱ PLC AND IEC 61131河南理工大學萬方科技學院本科畢業論文4Since its inception in the early ‘70s the PLC received increasing attention due to its success in fulfilling the objective of replacing hard-wired control equipments at machines. Eventually it grew up as a distinct field of application, research and development, mainly for Control Engineering. IEC 61 131 is the first real endeavour to standardize PLC programming languages for industrial automation. In I993 the International Electrotechnical Commission [4] published the IEC 61131 Intemational Standard for Programmable Controllers. Before the standardization PLC programming languages were being developed as proprietary programming languages usable to PLCs of a special vendor. But in order to enhance compatibility, openness and interoperability among different products as well as to promote the development of tools and methodologies with respect to a fixed set of notations the IEC 61131 standard evolved. The third part of this standard defines a suit of five programming languages:Instruction List (IL) is a low-level textual language with a structure similar to assembler. Originated in Europe IL is considered to be the PLC language in which all other IEC61 131-3 languages can be translated.Ladder Diagram (LO) is a graphical language that has its roots in the USA. LDs conform to a programming style borrowed from electronic and electrical circuits for implementing control logics.Structured Text (STJ is a very powerful high-level language. ST borrows its syntax from Pascal, augmenting it with some features from 河南理工大學萬方科技學院本科畢業論文5Ada. ST contains all the essential elements of a modem programming language.Function Block Diagram (FBD) is a graphical language and it is very common to the process industry. In this language controllers are modelled as signal and data flows through function blocks. FBD transforms textual programming into connecting function blocks and thus improves modularity and software reuse.Sequential Function Chart (SFC) is a graphical language. SFC elements are defined for structuring the organization of programmable controller programs.One problem with IEC 61 131-3 is that there is no standardized format for the project information in a PLC programming tool. At the moment there are only vendor specific formats. This is also one reason for the restriction of formalization approaches to single programs or algorithms. However, recently the PLC users’ organization PLCopen (see http://www.plcopen.org) started a Technical Committee to define an XML based format for projects according to IEC 61131-3. This new format will ease the access of formalization tools to all relevant information of a PLC project.Ⅲ. RE-ENGINEERING APPROACHThe presented approach towards re-engineering (cf. Fig.1) is based upon the conception that XML can be used as a medium in which PLC codes will be transformed.This transformation offers the advantage of obtaining avendor independent specification code. (Even if the PLCopen succeeds in 河南理工大學萬方科技學院本科畢業論文6defining a standardized format for PLC applications, there will remain a lot of existing programs that do not conform to this standard.) Based on this code a step-wise transformation to a formal model (automata) is planned. This model can then be used for analysis, simulation, formal verification and validation, and finally for the re-implementation of the optimized algorithm on the same or another PLC.Since re-engineering of complete programs will, in most cases, be only a semi-automatic process, intermediate visualization of the code is an important point. At different stages of the process different aspects of the code and/or formal model have to be visualized in a way that a designer can guide the further work. XML with its powerful visualization and transformation tools is an ideal tool for solving this task.IV. XML AS A TOOL FOR VISUALIZATIONXML (extensible Markup Language) is a simple and flexible meta-language, i.e， a language for describing other languages. Tailored by the World Wide Web Consortium (W3C) as a dialect of SGML [S], XML removes two constraints which were holding back Web developments [6]. The dependence on a single, inflexible document type (HTML) which was being much abused for tasks it was never designed for on one side; and the complexity of full SGML, whose syntax allows many powerful but hard-to-program options on the other side.While HTML describes how data should be presented, XML 河南理工大學萬方科技學院本科畢業論文7describes the data itself. A number of industries and scientific disciplines-medical records and newspaper publishing among them-are already using XML to exchange information across platforms and applications. XML can be tailored to describe virtually any kind of information in a form that the recipient of the information can use in a variety of ways. It is specifically designed to support information exchange between systems that use fundamentally different forms of data representation, as for example between CAD and scheduling applications.Using XML with its powerful parsers and inherent robustness in 河南理工大學萬方科技學院本科畢業論文8terms of syntactic and semantic grammar is more advantageous than the conventional method of using a lexical analyzer and a validating parser (cf. Fig. 2, [7]).The conventional method of analysis of program code requires a scanner (lexical analyser) which generates a set of terminal symbols (tokens) followed by a parser thatchecks the grammatical structure of the code and generates an object net. In the object net the internal structure of the program is represented by identified objects and the relations between them. Both the scanner and the parser to be used in this method are document oriented which implies that analysis of different types of documents requires rewriting the generated code for the scanner and the parser. An example of an application of this method can be found in [8].The most promising aspect of using XML instead is that XML and its complementary applications for transformations are standardized so as to provide maximum flexibility to its user.The XML based method is advantageous, since the lexical specification is an invariant component of XML; therefore the well-formedness is independent from the respective individual application.Hence, an XML-Parser also can transfer well-shaped XML documents in an abstract representation called Document Object Model (DOM) without using a grammar. DOM is an application programming interface (APII) for valid HTML and well-formed XML documents. It defines the logical structure of documents and the way a document is accessed and manipulated. In the DOM specification, the 河南理工大學萬方科技學院本科畢業論文9term "document" is used in a broad sense increasingly. XML is used as a way of representing many different kind of information that may be stored in diverse systems, and much of this would traditionally be seen as data rather than as documents. Nevertheless, XML presents this data as documents, and the DOM can be used to manage this data［5］.XSLT, the transformation language for XML is capable of transforming XML not only to another XML or HTML but to many other user-friendly formats. Before the advent of XSLT, the transformation of XML to any other format was only possible through custom applications developed in a procedural language such as C++, Visual Basic or, Java. This procedure lacked the generality with respect to the structural variation of XML documents. Capitalizing on the concept that the custom applications for the transformations are all very similar, XSLT evolved as a high-level declarative language [9]. XSLT functions in two steps. In the first step, it performs a 河南理工大學萬方科技學院本科畢業論文10structural transformation so as to convert the XML into a structure that reflects the desired output. The second stage is formatting the new structure into the required format, such as HTML or PDF (cf. Fig. 3 ). The most important advantage of this transformation is that it allows a simple and easily-conceivable representation of the document or data structure embedded inside the well-structured but hard-to-understand XML to be produced. When HTML is chosen as the format of the transformed produce it is possible to use the extensive ability of HTML to produce an easily-conceivable and attractive visualization of a program.Every XML document has its own syntax and vocabulary. Therefore, in addition to being well-formed, the XML document needs to conform to a set of rules. According to W3C recommendations this set of rules has to be defined either through a Document Type Definition (DTD) or an XML Schema. The rules defined in a DTD or an XML Schema state the hierarchical and structural constraints of the XML document.The DTD is for defining the document grammars; more recently a number of alternative languages have been proposed. The W3C XML Schema language replicates the essential functionality of DTDs, and adds a number of features: the use of XML instance syntax rather than an ad hoc notation, clear relationships between schemas and namespaces, a systematic distinction between element types and data types, and a single-inheritance form of type derivation. In other words schemas offer a richer and more powerful way of describing 河南理工大學萬方科技學院本科畢業論文11information than what is possible with DTDs. Fig. 4 shows the XML technologies discussed above and the connection between them.V. AN APPROACH FOR THE VISUALIZATION OFPLC PROGRAMSA. OverviewSince Instruction List (IL) is the most commonly used PLC language in Europe, the presented approach is based on this language. The proprietary IL dialect Siemens STEP 5 and the standardized version according to IEC 61131-3 are considered.The generation of XML documents showing different aspects of a PLC program is realized in the following three steps (cf. Fig. 5):1.Transformation of the PLC program to an XML document河南理工大學萬方科技學院本科畢業論文122.Validation of the XML against the XML Schema which sets the syntax of the XML3.Identification of the Instruction elements of the transformed XML according to the instruction set of the source PLCThese three steps are discussed in sub-sections B to D respectively. Sub-section E explains the visualization of the different XMLs obtained during the preceding steps.Throughout this Section an example is used to illustrate the presented concepts. Fig. 6 shows a PLC code written in Instruction List Siemens S5. The PLC code is written in atabular form where each row element is either a delimited list consisting of address, label, instruction, operand and description or a comment.Kommentar :Autor河南理工大學萬方科技學院本科畢業論文13Erstellt :15.07.2003 Geaendert am: B1B:ONETZWERK 1 EMPFANGEN SLAVE 3 VON MASTERNAME :EMPE'MAST0005 :U M98.7 ABFRAGE OB EMPFANG MOEGLICH00060007 :SPB= MOOl00080009 :A DB140 EMPFANGSFACH IST DB 140OOOA :L KF+20 LAENGE DES DATENPAKETSoooc :T DLOOOOD :L KF+O ZIELNUMMER O=MASTEROOOF :T DRO00100011 :UNM98.7 FANGEN WIEDER ERLAUBEN0012 :S M98.70013 MOOl :NOP 000140015 :BE BAUSTEIN ENDEFig. 6 A PLC program written in Siemens S5 Instruction ListB. Conversion of a PLC Program inio a well-formed XMLGiven a PLC program in ASCII format and in a tabular structure with separate columns for addresses, labels, instructions, operands and descriptions delimited by whitespaces, XSLT can convert it into a 河南理工大學萬方科技學院本科畢業論文14well-formed XML document. The XML document obtained through this transformation is a hierarchically structured document.Fig. 7 shows the XML document obtained through the transformation of the PLC code of Fig. 6. The XML document is structured in a hierarchy in which the root element is the IL Code Block representing the whole PLC code. Each of the rows of the PLC code is contained within a corresponding ILRow element which is M e r smtctured into child elements.Note: The structure chosen for the XML representation of IL-Code is oriented at the working proposal of the PLCopen.河南理工大學萬方科技學院本科畢業論文15C. XML Validation against the XML SchemaThe XML obtained as a result of the previous processing can be validated using a validating parser that confirms that the XML document in addition to being well-formed conforms to the set of syntactic rules defined in context of the PLC programming language.D. rdenhpcation of instructionsThis step in the process of visualization of PLC programs using XML ensures that the XML document to be used for visualization contains only valid instructions.XSLT can be used to transform the well-formed and valid Xh4L to another XML which as a result of identification on instructions has an additional attribute appended to the instruction tags. This attribute notifies whether the instruction is a valid instruction of the concerned instruction set. This transformation procedure is also capable of attaching attributes to the instruction tags that declares a classification of the instructions into predefined classes.The instruction identification of the transformed XML proofs the semantic of the XML in accordance with the operation types of the PLC programming language.In the example of this section, (cf. Fig. 8), the new XML contains additional attributes which classify the instructions according to the type of operation it represents. The STEPS instructions are categorized into eleven different types of operations e.g. logical, jump, load or transfer operation assignment, etc.河南理工大學萬方科技學院本科畢業論文16(Instruction instructionId='Logical Operation")U-.SPB-BEFig. 8 A new transformed XML showing only the inslructions and thecorresponding instruction IDE. Visualization of XMLBoth of the XML documents generated above can be transformed into HTML or other readable documents with the help of XSL. An ingenious XSL can be designed so as to produce an HTML which can convey the logical and other features of the PLC program in an easily conceivable form. Moreover, the DOM structure embedded in the XML (cf. Fig. 9), also enables the user to navigate through the PLC 河南理工大學萬方科技學院本科畢業論文17programs in an easy way.For the example the visualization is done in HTML. This visualization is done for the transformed XML after the validation of it's syntax as a table where the child elements of the ILRow are the columns of this table.The XML after the instruction identification is transformed using the XSL, where the instruction and the instruction Id, obtained after extracting the XML according to the type of operations are visualized in a table containing two columns (Instruction, Instruction Id) in 河南理工大學萬方科技學院本科畢業論文18HTML.The HTML structures suggested here are not the only possibilities, with which the XML can be visualized, but they give a very easy practical option for the user's grasp of the PLC code.Fig. IO shows the same PLC code as shown in Fig. 4 as a HTML document converted &om the XML document shown in Fig. 7 using XSL. This visualization enables a better understanding of the PLC program. Fig. 11 shows the special visualization of instruction ids given in the XML of Fig. 6. VI. CONCLUSIONS AND OUTLOOKRe-engineering of PLC programs needs a formal approach to be developed. In this paper one way to solve this task is introduced. Based on a given PLC program written in Instruction List a step-wise transformation to a formal representation is proposed. Since this process will not be fully automatic, the need for flexible visualization of intermediate steps is derived. XML is presented as a flexible, 河南理工大學萬方科技學院本科畢業論文19standardized means to serve as data format for the description of the PLC code. The corresponding technology of XSL transformations and the Document Object Model are presented as tools for the variety of customized visualization tasks during the re-engineering process.Based on the XML description of PLC programs further transformations will be applied to finally derive a completely formalized description of the original PLC code. This will be in the form of a finit