<p>ZFS1600/16/24掩護式液壓支架底座、推移千斤頂設計【優秀課程畢業設計+含16張CAD圖紙+帶開題報告+中期檢查表+外文翻譯+44頁加正文1.46萬字】</p><p>【詳情如下】【需要咨詢購買全套設計請加QQ1459919609】</p><p>A0-液壓支架裝配圖.dwg</p><p>A1-底座.dwg</p><p>A2-千斤頂裝配圖.dwg</p><p>A3-活塞桿.dwg</p><p>A3-筒.dwg</p><p>A3-缸體.dwg</p><p>A3-缸底.dwg</p><p>A3-缸筒.dwg</p><p>A4-內導向環.dwg</p><p>A4-半環.dwg</p><p>A4-卡鍵.dwg</p><p>A4-壓盤.dwg</p><p>A4-導向套.dwg</p><p>A4-擋套.dwg</p><p>A4-接頭.dwg</p><p>A4-活塞.dwg</p><p>中期檢查表.doc</p><p>外文翻譯.doc</p><p>開題報告.doc</p><p>文件清單.txt</p><p>設計正文.doc</p><p>液壓支架底座及推移千斤頂設計</p><p>ZFS1600/16/24掩護式液壓支架底座、推移千斤頂設計</p><p>摘要</p><p>&nbsp; &nbsp; 本課題主要論述了液壓支架的主要設計過程。其中包括：液壓支架的選型、總體設計、主要零部件的設計以及液壓系統設計。</p><p>支架的形式為掩護式支架。支架除了要有效的對頂板進行支撐外，還要實現升、降、推、移幾個步驟。支架采用四連桿機構，改善支架的受力狀況，縮小支架的升降過程中頂梁前端前后移動的距離。立柱采用單伸縮液壓缸，前端帶有加長桿，以滿足支架最低及最高位置時的高度要求。頂梁掩護梁、底座都做成箱體結構用鋼板焊接而成。</p><p>在研制液壓支架時，需要對支架進行生產試驗和分析研究，確定合理的液壓支架受力參數、運動參數和結構參數，以及選定液壓支架最佳方案等方面綜合性的科學技術問題。</p><p>關鍵詞：液壓支架；頂梁；底座；立柱；結構設計 &nbsp; &nbsp;</p><p>ABSTRACT</p><p>The article mainly elaborate the hydraulic support design for top-caving. including: the selection of hydraulic pressure support form, system design, main spar part design and examination of hydraulic system design.</p><p>The support eliminates must realize effectively carries on the strut to the roof, but also must realize ,to fall, to push, move four steps .the support uses four link motion gears, improves the support the stress condition, reduces the support to rise and full the distance which in the process fort end the top-beam around moves. The column uses the list expansion and contraction hydraulic cylinder, front end has legthen the pole, satisfies the support to be lowest and time the highest position high request. The top-beam, shields Liang, the foundation all makes the packed in a box body structure, becomes with the steel plate welding.</p><p>&nbsp; &nbsp; At research to presses the support, need to carry on produce to experiment and analyze the research, make sure reasonable of liquid presses the support to be subjected to the dint parameter, the sport parameter and the structure parameters, and make selection the liquid to press the synthetic science technique problem of aspect of etc. of the best project of support.&nbsp;</p><p>Keyword: Hydraulic pressure support；Top beam；Cradle；the column-type support；structure design</p><p>目錄</p><p>摘要<span class="Apple-tab-span" style="white-space:pre"></span>I</p><p>ABSTRACT<span class="Apple-tab-span" style="white-space:pre"></span>II</p><p>目錄<span class="Apple-tab-span" style="white-space:pre"></span>1</p><p>1緒 &nbsp;論<span class="Apple-tab-span" style="white-space:pre"></span>1</p><p>1.1前言<span class="Apple-tab-span" style="white-space:pre"></span>1</p><p>1.2本課題的研究目的和意義<span class="Apple-tab-span" style="white-space:pre"></span>2</p><p>2液壓支架基本理論分析<span class="Apple-tab-span" style="white-space:pre"></span>4</p><p>2.1 液壓支架的工作原理<span class="Apple-tab-span" style="white-space:pre"></span>4</p><p>2.1.1 支架推移<span class="Apple-tab-span" style="white-space:pre"></span>4</p><p>2.1.2支架升降<span class="Apple-tab-span" style="white-space:pre"></span>5</p><p>2.1.3 支架承載過程<span class="Apple-tab-span" style="white-space:pre"></span>5</p><p>2.2 液壓支架的類型和結構<span class="Apple-tab-span" style="white-space:pre"></span>7</p><p>2.2.1 掩護式支架<span class="Apple-tab-span" style="white-space:pre"></span>7</p><p>2.2.2 支撐式支架<span class="Apple-tab-span" style="white-space:pre"></span>8</p><p>2.2.3 支撐掩護式支架<span class="Apple-tab-span" style="white-space:pre"></span>8</p><p>2.2.4 特種液壓支架<span class="Apple-tab-span" style="white-space:pre"></span>9</p><p>&nbsp; 2.3 對液壓支架的基本要求<span class="Apple-tab-span" style="white-space:pre"></span>9</p><p>&nbsp; 2.4 支架的選型設計<span class="Apple-tab-span" style="white-space:pre"></span>10</p><p>2.4.1設計的原始條件<span class="Apple-tab-span" style="white-space:pre"></span>10</p><p>2.4.2支架的支護性能與外載荷<span class="Apple-tab-span" style="white-space:pre"></span>10</p><p>2.4.3 影響架型選擇的因素<span class="Apple-tab-span" style="white-space:pre"></span>11</p><p>2.4.4 支架架型的確定<span class="Apple-tab-span" style="white-space:pre"></span>12</p><p>3 液壓支架的整體結構設計<span class="Apple-tab-span" style="white-space:pre"></span>14</p><p>3.1 支架高度、中心距的確定<span class="Apple-tab-span" style="white-space:pre"></span>14</p><p>3.1.1支架高度<span class="Apple-tab-span" style="white-space:pre"></span>14</p><p>3.1.2支架伸縮比<span class="Apple-tab-span" style="white-space:pre"></span>14</p><p>3.1.3支架間距<span class="Apple-tab-span" style="white-space:pre"></span>14</p><p>3.2底座長度的確定<span class="Apple-tab-span" style="white-space:pre"></span>15</p><p>3.2.1底座長度<span class="Apple-tab-span" style="white-space:pre"></span>15</p><p>3.2.2 底座寬度<span class="Apple-tab-span" style="white-space:pre"></span>15</p><p>4支架主要部件的設計<span class="Apple-tab-span" style="white-space:pre"></span>16</p><p>4.1支架主要部件的設計要求<span class="Apple-tab-span" style="white-space:pre"></span>16</p><p>4.2底座的設計<span class="Apple-tab-span" style="white-space:pre"></span>17</p><p>4.2.1液壓支架的底座<span class="Apple-tab-span" style="white-space:pre"></span>17</p><p>4.2.2 底座接觸比壓<span class="Apple-tab-span" style="white-space:pre"></span>17</p><p>4.3千斤頂技術參數的確定<span class="Apple-tab-span" style="white-space:pre"></span>18</p><p>4.3.1推移千斤頂<span class="Apple-tab-span" style="white-space:pre"></span>18</p><p>5 支架受力分析與計算<span class="Apple-tab-span" style="white-space:pre"></span>20</p><p>5.1支架工作狀態<span class="Apple-tab-span" style="white-space:pre"></span>20</p><p>5.1.1 頂板狀態<span class="Apple-tab-span" style="white-space:pre"></span>20</p><p>5.1.2支架工作狀態<span class="Apple-tab-span" style="white-space:pre"></span>20</p><p>5.1.3支架受力<span class="Apple-tab-span" style="white-space:pre"></span>21</p><p>5.2受力計算<span class="Apple-tab-span" style="white-space:pre"></span>21</p><p>6 液壓系統設計<span class="Apple-tab-span" style="white-space:pre"></span>25</p><p>6.1液壓支架的液壓系統特點<span class="Apple-tab-span" style="white-space:pre"></span>25</p><p>6.2 液壓系統的設計方法<span class="Apple-tab-span" style="white-space:pre"></span>26</p><p>6.3 千斤頂系統<span class="Apple-tab-span" style="white-space:pre"></span>26</p><p>6.3.1. 推移千斤頂系統<span class="Apple-tab-span" style="white-space:pre"></span>27</p><p>6.4乳化液泵站系統<span class="Apple-tab-span" style="white-space:pre"></span>28</p><p>6.4.1乳化液泵站<span class="Apple-tab-span" style="white-space:pre"></span>28</p><p>6.4.2泵站液壓系統<span class="Apple-tab-span" style="white-space:pre"></span>29</p><p>6.4.3乳化液泵站的元部件<span class="Apple-tab-span" style="white-space:pre"></span>32</p><p>7技術經濟分析<span class="Apple-tab-span" style="white-space:pre"></span>35</p><p>8結論<span class="Apple-tab-span" style="white-space:pre"></span>36</p><p>致謝<span class="Apple-tab-span" style="white-space:pre"></span>37</p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200119797683904862905_1.gif" style="float:none;" title="A0-液壓支架裝配圖.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200119849163995304236_1.gif" style="float:none;" title="A1-底座.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200119885044061260426_1.gif" style="float:none;" title="A2-千斤頂裝配圖.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200119922484124744034_1.gif" style="float:none;" title="A3-缸底.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200119955244187943561_1.gif" style="float:none;" title="A3-缸體.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200119998924261642322_1.gif" style="float:none;" title="A3-缸筒.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200120031684319140021_1.gif" style="float:none;" title="A3-活塞桿.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200120061324371582886_1.gif" style="float:none;" title="A3-筒.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200120095644433309831_1.gif" style="float:none;" title="A4-半環.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200120125284489050868_1.gif" style="float:none;" title="A4-擋套.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200120161164545007058_1.gif" style="float:none;" title="A4-導向套.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200120192364604977341_1.gif" style="float:none;" title="A4-活塞.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200120223564654947623_1.gif" style="float:none;" title="A4-接頭.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200120296884784387420_1.gif" style="float:none;" title="A4-卡鍵.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200120346804871599506_1.gif" style="float:none;" title="A4-內導向環.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200120396724953513420_1.gif" style="float:none;" title="A4-壓盤.gif"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200120463805073738065_1.png" style="float:none;" title="工作原理.png"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200122385728453868913_1.png" style="float:none;" title="開題報告.png"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200123593170571738105_1.png" style="float:none;" title="設計目錄1.png"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200123625930634937633_1.png" style="float:none;" title="設計目錄2.png"/></p><p><img src="http:/www.szxfmmzy.com/ueditor_s/net/upload/2017-6/2/6363200123697690751148185_1.png" style="float:none;" title="設計字?jǐn)?shù)統計.png"/></p><p>參 考 文 獻<span class="Apple-tab-span" style="white-space: pre;"></span>38</p><p><br/></p>