【溫馨提示】====【1】設計包含CAD圖紙 和 DOC文檔，均可以在線預覽，所見即所得，，dwg后綴的文件為CAD圖，超高清，可編輯，無任何水印，，充值下載得到【資源目錄】里展示的所有文件======【2】若題目上備注三維，則表示文件里包含三維源文件，由于三維組成零件數量較多，為保證預覽的簡潔性，店家將三維文件夾進行了打包。三維預覽圖，均為店主電腦打開軟件進行截圖的，保證能夠打開，下載后解壓即可。======【3】特價促銷，，拼團購買，，均有不同程度的打折優惠，，詳情可咨詢QQ：1304139763 或者 414951605======【4】 題目最后的備注【LB系列】為店主整理分類的代號，與課題內容無關，請忽視

本科生畢業設計 (論文) 外 文 翻 譯 原 文 標 題 Dynamics and screening characteristics of a vibrating screen with variable elliptical trace 譯 文 標 題 變橢圓軌跡振動篩的動力學和篩選特性 特性 作者所在系別 機電工程學院 作者所在專業 機械設計制造及其自動化 作者所在班級 B13113 作 者 姓 名 魏許杰 作 者 學 號 20134011311 指導教師姓名 段新豪 指導教師職稱 教授 完 成 時 間 2017 年 3 月 北華航天工業學院教務處制 譯文標題 變橢圓軌跡振動篩的動力學和篩選特性 原文標題 Dynamics and screening characteristicsa vibrating screen with variable 作 者 HE Xiao-Mei，CS Liu 譯 名 何小梅，劉楚生 國 籍 中國 原文出處 《International Journal of Mining Science and Technology》 譯文： 摘要：根據恒床厚度的篩選過程振動篩理想運動特征被提出， 提出了一個新的振動篩變橢圓跟蹤。 準確的力學模型建立，根據所需的結構構造運動特征。 應用多種學位自由度振動理論、特點，分析振動篩的。 振動篩運動參數獲得，它的運動軌跡有線性的，圓的，橢圓的。振動篩的運動動態方程可通過計算機模擬得以有效的解決。屏幕表面五個特殊的點的技術參數，包括振幅，運動速度和引發指數，是通過理論計算獲得。 結果顯示，新設計的振動篩的軌跡遵循理想的篩選運動。篩分效率及處理能力可能因此而有效改進。 關鍵字：變橢圓軌跡；篩選過程與常量床厚度；動態模型；運動特性； 篩選特征 1介紹 篩分操作是一個重要的煤礦處理組成部分。振動篩是最廣泛使用的篩選工具之一。 振動篩，如直線振動篩、圓振動篩或橢圓振動篩，有一個簡單的平移運動。在篩面上處處運動保持相同的運輸速度和引發指數的，從而導致低效率的篩選。充實的拋擲指數提高加工能力打破了電機或降低了工作強度。 在本文中，我們報告的設計，一個新的振動篩變運動的痕跡，原則的基礎上篩選過程固定床厚度不同的部分。振動篩穿越不同的橢圓軌跡和由此產生的議案，同意與理想的運動。因此，屏幕處理能力和效率均可以提高。 2振動表面的理想運動和變橢圓軌跡振動篩的建議 2.1振動篩常見的篩選特性 振動篩通常工作在固定振動篩上的物料表面強度。移動投擲，滾動或滑動運動”。 為常見的安檢，物料粒度廣泛分布在進料端的能量傳遞。物質粒子的振動篩嚴重消退。因此，大量顆粒層只有很短的距離飼料結束。材料穿透屏幕在第一個1/ 4到1 /2的屏幕，它影響篩選和降低加工能力的。減少細粒物質導致比粒子的大小接近或大于網格。因此，篩分效率下降驚人。物料粒度同時統一的，從振動源給予物料的能量損失很小。因而物料粒子的振幅和速度增加。這導致了物料的垂直深度在送電端厚，而在放電結束端薄，進而影響了篩分效率和處理能力。常見的篩分特性如圖1. 2.2屏幕表面的理想運動和實施方案 3 變橢圓軌跡振動篩的動力學模型分析 我們激振力偏離中心 重力，要更改新的運動模式 振動篩。 剛度矩陣的振動 隔離春天是根據這些不是零 情況和振動系統有多重 自由度。 小橫搖 被忽視的簡化研究。 議案 被認為是剛性梁的非線性振動 縱向?qū)ΨQ平面。 在每個點 振動是一個組合翻譯 的重心和屏幕投球 重心。 以前的研究被忽視 水平彈性勢力的影響 垂直方向振動的秋千 屏幕 [311] . 準確的動態模型組成 包括耦合的三個微分方程 自由度在垂直、水平和 擺動方向建議。 振動篩的數學模型 圖中所示.2。 重力澳中心，采取 直角坐標系的原點在靜態 均衡，按照剛性運動 平面 [12] . 微分方程組 廣義坐標使用重心 坐標x、y和秋千赤緯角， θ，可以寫成： 其中m是振動篩的質量；j# 轉動慣量美元相對于中心 重力，澳；x和y的x和y位移 方向；x和y在x和y的速度 方向；加速x和y在x和 你們方向；θis擺動角位移； αthe安裝角度；外匯、f橫跨薩楊德河fθthe 阻尼系數在x、y andθdirections； k和k ythe剛度系數的支持 沿x和y directions;a0汀春天 激振力的振幅，提供的 2 0 =mrω， 偏心其中r為半徑，m的質量 偏心塊andωthe刺激角頻率； 1 我和l2每個之間的距離支持 春季和重心，我的距離 偏心塊的旋轉中心之間 重心；而βthe夾角 我和x路之間。 阻尼力 相當小，可以忽略。 然后，式（1）可以簡化式（2）。 4變橢圓軌跡振動篩的運動和篩選的效果分析 4.1個分析的運動參數多自由度振動理論用來尋找一個穩定解的強迫振動 [ 13]，如下： 替代參數在式（3）到（2）式。允許一個穩定的解決方案被發現。 假設一個點的屏幕坐標為D(Dx,Dy).運動方程如下： 當，D點的軌跡是一條直線。當E=S，C=HS時，D點的軌跡是圓。 一般來說，（6）式表示方程的橢圓面直角坐標系。XOY坐標系以γ角速度逆時針旋轉從而給定一個新的坐標系。一個標準的橢圓公式在消除xDyD后可得公式（7）。 從這我們知道有些屏幕上的點 移動或圓的行中，而其他移動 橢圓。 只要旋轉的相對位置 偏心塊的中心和重心 正確調整，變橢圓運動 屏幕將獲得的。 這提供了一個合理的 扔指數和材料傳遞速度和 提高篩分效率。 4.2 運動軌跡和篩分效率分析 穩定振動系統解決方案，就振動篩而言的，可以給出 在振動篩上任一點的運動方程為 公式（8）表示重心的痕跡近似圓形，水平和垂直方向的振幅在3.5mm 和5mm之間。圖 3表示如重心的移動存在三個自由度。圖3水平和垂直方向的相位差和擺角的振幅一樣。 5 結論 1）新振動篩變橢圓 根據原則提出了運動軌跡常數床厚度的篩選過程。振動篩跟蹤不同的不同點橢圓路徑。運動規律也同意配合篩面的理想運動特性。因此，篩選能力和處理效率會增加。 2）振動的理論運動學分析屏幕做是為了研究如何變不同 參數會影響屏幕的議案。振動篩參數的議案線性跟蹤獲得圓或橢圓。 3) 總振動篩運動的痕跡 通過計算機模擬獲得。篩選技術參數，包括振幅，速度和引發指數，五個的特定沿屏幕表面計算。這些參數是與篩分效率。結果顯示模式設計的議案 振動篩符合理想的篩選議案，設計能夠有效 提高篩分效率。 4) 勵磁機軸中心的地位，相對 振動篩的重心，是篩選高效的極為重要的。 因此，我們可以設計一個振動篩具有更高的處理 的能力而又不會增加功耗 調整軸中心的相對位置。這是一個點，需要進一步研究。 參考文獻 [1] Wen B C,Liu F Q.振動的理論與應用機器.北京：中國機械出版,1982 [2] Gu Q B,Zhang E G.復雜軌跡振動篩研究. 1998(1):42–46 [3] Hao F Y.煤制備手冊：技術設備.北京：中國煤炭行業出版社,1993 [4] Yan F.篩分機械.北京：中國煤炭行業出版社.1995 [5] Liu C S,Zhao Y M..篩面上的非線性特性的研究. 礦物處理設備,1999(1):45–48 [6] Tao Y J,Luo Z F,Zhao Y M..在重力強力分離器使用方面的煤脫硫的實驗研究.中國礦業與技術大學. 2006,16(4):399–403 [7]Zhang E G.篩分，粉碎，脫水設備.北京:中國煤工業出版社，1991 [8] Khoury D L.煤清潔工藝.美國：諾易斯數據公司，1981 [9] Shang N X,Na J F. 2TYA1842圓振動篩.礦業與加工設備，1990(2):20–24 [10] Ye H D.等厚圓篩分及其應用. 燒結和碼垛, 1999,5(3):30–33 [11] Wen B C,Liu S Y,He Q.振動機械理論和動力學設計方法.北京：中國機械出版社，2001 [12] Wang F,Wang H.篩分機械. 北京：中國機械出版社，2001 [13] Ni Z H.振動力學.西安：西安交通大學出版社，1989 [14] Zhu W B.復雜運動軌跡振動篩的工作原理和計算機仿真.礦業與加工設，2004(10):34–36 [15] Peder M.莫根深系列—一種新型的篩分概念.礦物加工，1996,7(37):311–315 [16] Wen B C.圓振動篩的自動同步理論.波士頓：美國機械工程協會，1987:495–500. 原文： Abstract: the ideal motion characteristics for the vibrating screen was presented , according to the principle of screening process with constant bed thickness. A new vibrating screen with variable elliptical trace was proposed. An accurate mechanical model was constructed according to the required structural motion features.Applying multi-degree-of-freedom vibration theory,characteristics of the vibrating screen was analyzed.Kinematics parameters of the vibrating screen which motion traces were linear,circular or elliptical were obtained.The stable solutions of the dynamic equations gave the motions of the vibrating screen by means of computer simulations.Technological parameters,including amplitude,movement velocity and throwing index,of five specific points along the screen surface were gained by theoretical calculation .The results show that the traces of the new designed vibrating screen follow the ideal screening motion .The screening efficiency and processing capacity may thus be effectively improved. Keywords:variable elliptical trace;screening process with constant bed thickness; dynamic model;motion characteristic;screening characteristics 1 Introduction Screening operations are an important part of coal processing. The vibrating screen is one of the most extensively used screening tools. Vibrating screens, such as linear vibrating screen, circular vibrating screen or elliptical vibrating screen, have a simple translational motion. The motion follows the same path everywhere on the screen and so the screen has constant transport velocity and throwing index, which leads to low screening efficiency. Augmenting the throwing index to improve breaks the exciting motors processing capacity lowers the working. In this paper , we report on the design of a new vibrating screen with variable motion traces that is based on the principle of screening process with constant bed thickness [3–4].Different parts of the vibrating screen traverse different elliptical traces and the resulting motion agrees well with the ideal motion .Thus the screen processing capacity and efficiency can both be improved. 2 Ideal motion for a screen surface and the proposal of a vibrating screen with variable elliptical trace 2.1 Screening characteristics of common vibrating screens Vibrating screens commonly work at a fixed vibration intensity .Material on the screen surface moves by throwing, rolling or sliding motions .For common screeners ,material granularity is widely distributed at the feed end .The energy imparted to the material particles from the vibrating screen is severely dissipated .Consequently ,a large number of particles become laminated only a short distance from the feed end .The material penetrates the screen within the first 1/4 to 1/2 of the screen ,which affects screening and lowers processing capacity [5].The decrease of fine-grained material causes the ratio of particles close in size to ,or larger than ,the mesh to increase .Thus ,the screening efficiency declines dramatically .The material granularity simultaneously becomes uniform and the energy imparted from the vibrations to the material suffers little loss .Hence ,the amplitude and velocity of the material particles increase .This causes the material bed depth at the feed end to be thick while at the discharge end it is Thin .This kind of motion leads to an asymmetrical penetration along the screen surface,which influences the screening efficiency and processing capability [6].Common screening characteristics are shown in Fig.1. 2.2 Ideal motion for screen surface and implementing scheme The ideal motion for screen surface is described below, according to the principle of screening process with constant bed thickness .The feed end of the screen has a bigger throwing index and a higher material delivery velocity ,which makes bulk material quickly penetrate and causes rapid de-laminating. Earlier lamination of material increases the probability of fine-grained material passing through the mesh .The screen has an appropriate throwing index and a little higher material delivery velocity in its middle part .This is of benefit for stabilizing fine-grained materials and for penetrating uniformly along the screen length .A lower throwing index and material delivery velocity near the discharge end causes the material to stay longer on the screen and encourages more complete penetration of the mesh. Two methods are currently used to improve screening efficiency [7–8].The first is to add material to the screen from multiple feed ports. This is troublesome in practical use especially in terms of controlling the distribution of differently granulated materials .Hence it is rarely used in practical production. The second way is to adopt new screening equipment like, for example, a constant thickness screen. The motion of the new screen surface causes material to maintain the same, or an increased, thickness .It achieves a rather more ideal motion. The main problem with the constant thickness screen is that it covers a bigger area and that the structure is complicated and hard to maintain .A simple structure with good screening efficiency is still a necessity. We have designed a new vibration screen with a variable elliptical trace that is based upon an ideal screen motion for use in raw coal classification. The size of the vibrating screen is 3.6 m×7.5 m,the feed granularity is 0 to 50 mm and the classification granularity is 6mm.Elliptically vibrating screens combine the basic advantages of both circular and linear vibrating screens [9–10].The long axis of the ellipse determines material delivery and the short axis influences material loosening, to be exact. 3 Dynamics model analysis of vibrating screen with variable elliptical trace We made the exciting force deviate from the center of gravity,to change the motion pattern of the new vibrating screen.The stiffness matrix of the vibration isolation spring was not zero under these circumstances and the vibrating system had multiple degrees of freedom.Minor transverse wagging was neglected to simplify the research.The motion was considered to be a linear vibration of a rigid beam in the longitudinally symmetrical plane.At each point the vibration is a combination of the translation of the center of gravity and the screen pitching about the center of gravity.Previous studies neglected the influence of elastic forces in the horizontal and vertical direction on the swing of the vibrating screen [3,11].An accurate dynamic model consisting of three differential equations that include coupling of degrees of freedom in the vertical,horizontal and swing directions is proposed. The mathematical model of the vibrating screen is shown in Fig.2.The center of gravity, is taken as the origin of a rectangular coordinate system at static equilibrium, in accordance with rigid motion on the plane [12].Simultaneous differential equations in generalized coordinates using center of gravity coordinates,(x,y),and the swing declination angle, θ,may be written as where M is the mass of the vibrating screen’s the moment of inertia of M relative to the center of gravity,O;x and y the displacements in the x and y0directionas;x and y the velocities in the x and y directions’ and y the accelerations in the x and y directions; is the swing angular displacement; αthe installation angle;fx,f yond father damping coefficients in the x,y and directions; x k and k the stiffness coefficients of the supporting spring along the x and y directions; A0 the amplitude of the exciting force, given by2 0 A =mrω, where r is the radius of eccentricity the mass of the eccentric block and the exciting angular frequency; L1 and L2 the distances between each supporting spring and the center of gravity’s the distance between the rotating center of the eccentric block and the center of gravity; and,βthe included angle between the l and x directions. The damping force is rather small and can be neglected. Then Eq. (1) can be simplified to Eq.(2). 4 Motion and screening effect analysis of a vibrating screen with variable elliptical trace 4.1 Analysis of the motion parameters Multiple degree-of-freedom vibration theory was used to find a stable solution for the forced vibration [13],as follows: When E 2 S 2 +C 2 H 2 +2 ESCH=0, the trace of point D is a line. When E =Sand C =H, the trace of point D is a circle. In general. (6) expresses the equation of an ellipse.The xoy coordinate was rotated γ degrees anticlockwise to give a new set of x ′oy′coordinates. A standard elliptical equation was then obtained after eliminating D D x y in Eq.(7). From this we know that some points on the screen move in a line or a circle while others move in an ellipse .As long as the relative position of the rotating center of the eccentric block and the center of gravity are properly adjusted, variable elliptical motion of the screen will be obtained .This provides a reasonable throwing index and material delivery velocity and improves screening efficiency. 4.2 Analysis of motion trace and screening efficiency The stable solution of a vibrating system, in terms of the vibrating screen, can be given by The equations of motion for any point on the vibrating screen are Eq.(8)shows that the center of gravity traces an approximate circle and that the amplitude in the horizontal and vertical directions is between 3.5 mm and 5 mm.Fig.3 shows how the center of gravity moves in three degrees of freedom.Fig.3 gives the angular phase difference between the horizontal and vertical directions as well as the amplitude of the swing angle. 5 Conclusions 1)A new vibrating screen with variable elliptical motion trace was proposed according to the principle of screening process with constant bed thickness.Different points on the vibrating screen trace differentelliptical paths.The motion pattern agrees well with the ideal motion characteristic for a screening surface. Thus,screening capacity and process efficiency can be increased. 2)A theoretical kinematic analysis of the vibrating screen was done to study how varying different parameters affects the motion of the screen.Kinema- tics parameters of the vibrating screen that motion traces are linear,circular or elliptical are obtained. 3) Motion traces of total vibrating screen were gained through computer simulations.Screening technological parameters,including amplitude, velocity and throwing index,of five specific points along the screen surface were calculated. These parameters are related to screening efficiency. The results show that the motion pattern of the designed vibrating screen conforms to an ideal screening motion and that the design is able to effectively improve screening efficiency. 4)The position of the exciter axle center,relative to the center of gravity of the vibrating screen,is extremely important for screening efficient.Thus,we can design a vibrating screen with higher processing capacity without increasing power consumption by adjusting the relative position of the axle center.This is a point that requires further study. References [1]Wen B C,Liu F Q.Theory and Application of Vibration Machines.Beijing:China Machine Press,1982. [2]Gu Q B,Zhang E G.Study on complex-locus vibration screen.Mining&Processing Equipment,1998(1):42–46. [3]Hao F Y.Coal Preparation Manual:Technology and Equipment.Beijing:China Coal Industry Publishing House,1993. [4]Yan F.Screening Machines.Beijing:China Coal Indus-try Publishing House,1995. [5]Liu C S,Zhao Y M.Study on nonlinear characteristics of single particle on screening surface.Mining&Processing Equipment,1999(1):45–48 [6]Tao Y J,Luo Z F,Zhao Y M.Experimental research on desulfurization of fine coal using an enhanced centri- fugal gravity separator.Journal of China University of Mining&Technology,2006,16(4):399–403. [7]Zhang E G.Screening,Crushing and Dewatering Equipments. Beijing: China Coal Industry Publishing House,1991. [8] Khoury D L.Coal Cleaning Technology .USA:Noyes Data Corporation,1981. [9]Shang N X,Na J F.2TYA1842 elliptical vibration screen. Mining&Processing Equipment,1990(2):20–24. [10]YeHD.Elliptical isopachous screening technology andits application.Sintering and Palletizing,1999,5(3):30–33. [11]Wen B C,Liu S Y,He Q.Theory and Dynamic Design Method of Vibration Machines.Beijing:China Machine Press,2001. [12]Wang F,Wang H.Screening Machines.Beijing:China Machine Press,2001. [13]Ni Z H.Vibration Mechanics.Xi’an:Xi’an Jiaotong University Press,1989. [14]Zhu W B.Working principle and computer simulation of vibrating screen with complicated motion trace.Mining &Processing Equipment,2004(10):34–36. [15]Peder M.The mogensen E-series—a new screening oncept.Mineral Processing,1996,7(37):311–315. [16]Wen B C.Synchronization theory of self-synchronous vibrating machines with ellipse motion locus. Boston:American Society of Mechanical Engineers,1987:495–500. 指 導 教 師 評 語 外文翻譯成績： 指導教師簽字： 年 月 日 注：1. 指導教師對譯文進行評閱時應注意以下幾個方面：①翻譯的外文文獻與畢業設計（論文）的主題是否高度相關，并作為外文參考文獻列入畢業設計（論文）的參考文獻；②翻譯的外文文獻字數是否達到規定數量（3 000字以上）；③譯文語言是否準確、通順、具有參考價值。 2. 外文原文應以附件的方式置于譯文之后。