巴基斯坦35MW燃煤發電廠工程Pakistan SCIL 35MWe Coal-Fired Power Plant ProjectTechnical Specification of Electrical Lab Equipment電氣實驗室設備技術規范書 設計方: * The Consultant: Shangdong Yangguang Engineering Design Institute 賣方：* T he Seller: Jinan Yatuo Electrics Co.Ltd 買方The Buyer：*ndustries Ltd.日期：2015年8月03日Date: August 03, 20151. 總則General1.1本技術規范書適用于Pakistan SCIL 35MWe Coal-Fired Power Plant Project化學實驗室儀器儀表設備，并對動力車間化學實驗室儀器儀表設備的功能、結構、性能、安裝和試驗等方面提出了基本技術要求。 This technical specification is applicable to Pakistan SCIL 35MWe Coal-Fired Power Plant Project chemical lab instrument, and lays basic requirement on the function, structure, performance, installation and test of the equipment in the power house. 1.2 本技術規范書提出的是最低限度的技術要求,并未對一切技術細節作出規定，也未充分引述有關標準和規范的條文，賣方保證提供符合本技術規范書和工業標準的化學儀器儀表的優質設備及其相應服務。凡本技術規范書未涉及到的而又確需要賣方提供的任何產品或系統，均屬于賣方供貨范圍。The technical specifications is minimum technical requirement and not made a detail regulation, all the technical requirements are not stipulated in detail, and not fully quoted relative standard and specification terms. Seller shall make sure itself provide quality production which meets the technical specifications and industrial standard of chemical instruments and corresponding services. For any production or system that not involved in this technical specification but it really requires for this system, all belong to the sellers scope of supply.1.3本規范書所引用的標準若與供方所執行的標準發生矛盾時，按較嚴格的標準執行。If the standards of this technical specifications requirement conflict with that of the seller, the stricter one shall prevail. 1.4 如需方有除本規范書以外的其他要求，應以書面形式提出，經供需雙方討論、確認后，載于本規范書。If the buyer has additional requirements not in this specification, they shall be raised in written form, after the discussion and confirmation between the two sides, and put down in this specification.1.5賣方提供的文件，包括圖紙、計算、說明、校準步驟、使用手冊及所有相關資料等，均應使用國際單位制(SI)。所有文件、工程圖紙、相關資料及相互通訊，均需提供山東省陽光工程設計院及買方中英文對照版本簽字版各1份以及可編輯、修改的電子文檔各1份。The documents submitted by the seller, including the drawings, calculations, instructions, calibration procedures,user manuals and all relative dates and so on, shall all use SI. All documents, project drawings, relative dates and communications shall be supplied in Chinese-English version (1 signed hard copy and 1 editable soft copy) to SYEDI and the owner.1.6本技術規范書、招標過程中賣方相應的澄清問題、招投標確認的會議紀要等作為合同的一個附件，并與合同文件有相同的法律效力。This technical specification , bidders corresponding to clarify the problems in the process of bidding, bidding to confirm meeting minutes, etc as an attachment of the contract, and have the same legal effect with the contract documents.1.7設備采用的專利涉及到的全部費用均被認為己包含在設備報價中，賣方保證招標方不承擔有關設備專利的一切責任。Equipment used in the full cost of the patent involve all are thought to have included in the equipment quotation, bidder ensure the tenderee not bear responsibility for all relevant equipment patent.1.8如供方?jīng)]有對本規范書提出書面異議，需方則可認為供方提供的產品完全滿足本規范書的要求。 If the supplier did not submit a written objection to the specification, the buyer can consider that the products provided by the supplier are fully meet the requirements of this specification.1.9 賣方提供的實驗室儀器儀表設備應在三個及以上同等容量機組并具備三年及以上成功運行業績，已證明安全可靠。Bidders to provide laboratory instrumentation equipment shall be the same in three or more capacity units and more than three years and successful operation performance, has proved safe and reliable.1.10若賣方所提供的投標文件有前后不一致的條款，由招標方選擇確定。賣方對后續經招投標雙方確認的澄清文件內容的理解如有異議，解釋權歸招標方。If the tender documents provided by the bidder have inconsistent terms, be determined by the tenderee to choose. Bidder clarification of later confirmed by the both sides of bidding document the understanding of the content such as, power of interpretation belongs to the tenderee.1.11賣方應充分考慮其產品在巴基斯坦區域銷售限制、清關、知識產權等因素，如因此而引起的糾紛由賣方負責。Bidders should fully consider its products in Pakistan area sales restrictions, customs clearance, intellectual property and other factors, such as that caused by disputes shall be the responsibility of the bidder.2. 技術要求 Technical Requirement 2.1 規范和標準 Specification and standards 2.1.1儀表結構及材料應在工程、設計、加工和制造上是高標準。同時性能是高效地、操作是方便的，在指定的這些技術要求的工作范圍內，不應有超過標準的消耗和維修工作。For the structure and material of the instrument, the engineering, design, process and fabrication standard shall be superior ones. At the same time, it should have higher efficiency and convenient operation. Within the nominated work scope, there shall be no consumption and repair that exceeds the standards. 2.1.2執行有關國家及行業標準及規程，或等同于國際標準，當使用其它規程、規范或標準時，賣方應將它們與報價書一齊交送，同時提供差異附表。Implement the related national and industry standards and codes, or equal to the international standard; when apply other code, specification or standard, the seller shall send them together with the quotation, and provide the deviation list. 2.1.3賣方配套電動機應滿足下列總的要求：The motor supplied by the seller shall meet the following general requirement. 項目Project 功率等級Power Level 電壓等級Voltage Level絕緣等級Insulation Level溫升等級Temperature Rise Level型式TypeAC200kW及以上200kW and above10kVClass FClass B全封閉，外殼防護等級：IP54（室內）；IP56（室外）All enclosed; outside shell protection level: IP54(indoor); IP56(outdoor).200kW以下Below 200kW0.38kVDC各類容量All kinds of volumes 0.22kV2.2運行條件Operating condition2.2.1電源Power supply低壓電源： AC380V5%/3相4線制，AC 22010%1相2線制low-voltagepowersupply: AC380V5%3 phase 4-wire system, AC22010%1 phase 2-wire system直流電壓110VDC voltage should be 110 Volts DC頻率: 50HZ0.5HZFrequency: 50Hz0.5Hz2.2.2儀表壓縮空氣Instrument compressed air壓力Pressure: 0.5-0.8MPa(G)露點dewpoint: 0；粉塵Dust： 3um；含油量Oil content： 8ppm2.2.3 賣方應提供每種分析儀表對工作環境的要求，并在投標書中詳細說明。The seller shall clarify the working condition requirement of each instrument, and detail it in the bid documents. 2.2.4 如果賣方提供分析儀表環境的要求是由特殊設備實現的，請在投標書中提供特殊設備的型號及相應價格。If the working condition of the instrument is realized by special equipment, note the type and price of this equipment in the bid documents. 2.3 主要設備性能要求Performance Requirement on the main equipment 2.3.1在設計原理、制造工藝及整體性能上均應是先進的、安全的、可靠的、高質量的定型產品。招標方不接受過時、落后的產品，招標方有權選擇投標文件中某項產品開發的最高端產品，且有權要求賣方更改不滿足本技術條件書的投標設備產品。On the design principle, process technology and overall performance, the products used shall be advanced, safe, reliable, and high quality. The owner does not accept outdated and backward product. The owner has the right to select the top class product of the products listed in the bidding documents, and is entitled to require the seller to modify the equipment that does not conform to this technical specification. 2.3.2實驗室分析儀表測量元件與介質接觸部分應采用耐腐蝕材料，賣方在投標書中應詳細說明測量元件材質。The interface between the lab analysis meter measuring element and the media shall use anti-corrosion material; in the bid documents, the seller shall clarify the measurement element material. 2.3.3實驗室分析儀表應不受電源電壓波動影響，適應性強，長期穩定性好。The lab analysis instruments shall not be affected by the voltage fluctuation, with endurance and reliability. 2.3.4實驗室分析儀表應測量精度高、靈敏度高、重復性好、衰減小、漂移小。The lab analysis meter shall have high accuracy, sensibility, repeatability, and small reduction and displacement. 2.3.5分體式儀表應提供整套連接所需部件及詳細說明書。For the separate instruments, the connection parts and detailed manual shall be provided.2.3.6賣方應提供調試、培訓時所必須的藥品、器具、標準液及電極等易耗品,所供專用藥劑應便于購買或配制（賣方提供配置方法），電極及備品備件賣方應協助購買。The seller shall provide consumables like commissioning and training chemicals, apparatus, and standard liquid and electrode. The special chemicals shall be easy to buy or fabricated (the seller provides the fabrication method); the seller shall cooperate the buyer to purchase the electrode and spares. 2.3.7實驗室分析儀表測量范圍及其他要求詳見訂貨清單。The lab instrument measurement range and other requirement shall be listed in the order. 2.3.8賣方應在投標書中以專門章節描述所投標產品滿足上述技術要求所采用的技術方案。In the bid document, the seller shall use a separate chapter to state the technical scheme that can demonstrate the conformity to the technical requirement. 2.3.9賣方在投標文件中應提供所供設備詳細選型樣本和智能操作說明。In the bid documents, the seller shall provide equipment type-selection and smart operation explanation. 2.3.10賣方提供的設備性能測試必須符合或高于招標方執行使用的國際、國標、電力、環保、化工等標準及規范要求。The equipment performance test shall meet the national, international, electric power, environment friendly, and chemical standards required by the owner. 2.3.11 賣方應提供滿足5年所需的校準用的標準溶液/液體/固體。The seller shall provide calibration standard solution / liquid/ solids for five years. 3. 電氣實驗室設備清單Electrical lab equipment list序號No型號Item規格Specification技術參數Technical Specification數量No生產廠家Manufacturer1繼電保護校驗儀relay protection check meterPW40AE相關參數見附件1see attachment 11set北京博電新力Beijing Boxin 2搖表meggerZC-81-1000歐1set北京遠東Beijing Yuandong3搖表meggerZC-70-1000V2set北京遠東Beijing Yuandong4搖表meggerZC-70-500V3set北京遠東Beijing Yuandong5電流電壓表 ampere-voltage meterC41-VA1.5A-3A-7.5A-15A-30A2set北京遠東Beijing Yuandong6交直流安培表AC-DC ampere meterD26-A0-0.5A-1A2set哈爾濱Harbin7交直流電壓表AC-DC voltage meterD26-V0-75V-150V-300V-600V3set哈爾濱Harbin8交直流安培表AC-DC ampere meterD26-A0-2.5-5A2set哈爾濱Harbin9交直流安培表AC-DC ampere meterT51-A0-0.5-1A2set哈爾濱Harbin10電壓表voltage meterD26-V0-75V-100V-150V-300V2set哈爾濱Harbin11交流操作箱（YDJ系列輕型交流高壓實驗變壓器）AC operation box(YDJ series lite AC high voltage test transformer)YDJ-5/50交流試驗變壓器 容量 5KVA、電壓50KVcapacity 5kva, voltage 50kv1set青島華通電器Qingdao Huatong12開關回路電阻測試儀switch circuit resistance testerHPR200相關參數見附件2see attachment 22set青島華通電器Qingdao Huatong13直流操作箱（直流高壓發生器）DC operation box (DC high voltage generator)ZGF-65/2Voltage 65KV、Current 2mA1set青島華通電器Qingdao Huatong14直流標準電壓電流發生器DC standard ampere-voltage generatorYJ53Voltage：-10V12.110V current ：-1A0.12110A Accuracy：0.1%1set上海Shanghai15面板式數字電流表Pannel digital ampere meterPA15A相關參數見附件3attachment 31set上海精密Shanghai Finery Instrument 16感性負載電流電阻快速測試儀(MC-10A直流電阻測試儀)Perceptual load current resistance rapid tester (MC - 10 a dc resistance tester) MC-10A相關參數見附件4attachment 41set上海貿創電氣有限公司Shanghai Chuangmao17核相儀(MCHXS型無線數字核相儀)The phase tester (MCHXS wireless digital phase meter) MCHXS相關參數見附件5attachment 51set上海貿創電氣有限公司shanghai Chuangmao18滑線變阻器slide-wire rheostatBX7-114.5A,101set上海勝新Shanghai Shengxin19滑線變阻器slide-wire rheostatBX8-133.5A,821set上海勝新Shanghai Shengxin20溫濕度表humidity-temperature meter1set天津tianjin21HTGK-III高壓開關動特性測試儀HTGK-III GKC-EHTGK-III相關參數見附件6attachment 61set武漢華天電力自動化有限公司W(wǎng)uhan Huatian22數字雙鉗相位伏安表Digital dual-phase voltammetry table clampSNG-2000B相關參數見附件7attachment 71set武漢華天電力自動化有限公司W(wǎng)uhan Huatian23三相功率電能校驗儀three phase energy calibration instrumentHTDN-3C相關參數見附件8attachment 81set武漢華天電力自動化有限公司W(wǎng)uhan Huatian24電能表現場校驗儀energy calibration instrumentHTDN-3C相關參數見附件9attachment 91set武漢華天電力自動化有限公司W(wǎng)uhan Huatian25標準電流互感器Standard CTHL11set浙江團結Zhejiang Tuanjie26試驗導線test leading wire6（Red、Yellow、Green）、length 1.5m150 pcs3.1 HPR200開關回路電阻測試儀 HPR 200 loop resistance tester一、產品特性：1、大電流：回路電阻測試儀采用最新電源技術，能長時間連續輸出大電流，克服了脈沖式電源瞬間電流的弊端，可以有效的擊穿開關觸頭氧化膜，得到良好的測試結果2、抗干擾能力強：在嚴重干擾條件下，液晶屏最后一位數據能穩定在1個字范圍內，讀數穩定，重復性好3、使用壽命長：全部采用高精度電阻，有效的消除環境溫度對測量結果的影響，同時軍品接插件的使用增強了抗振性能4、攜帶方便：體積小、重量輕二、技術參數：Technical parameters1、測量范圍measurement range：11999 2、分 辨 率resolution ratio：13、測試電流：DC50A、100A、150A、200A四檔固定輸出Measuring current:4 grade fixed output at DC50A、100A、150A、200A.4、測量精度measuring accuracy：0.5%1d5、工作方式：連續Operating type: continuous6、顯示方式：三位半LCDDisplay mode: three and half digit LCD7、工作電源operating power source：AC220V10% 50Hz8、工作環境：溫度-1040；濕度80%RHOperating conditions: temperature: -1040; humidity80%RH9、體積dimensions：380350260mm310、重量weight：5kg(不含附件accessory excluded)3.2 HTDN-3C電能表現場校驗儀 HTDN-3C type electric energy meterfielding calibrator產品特征1、儀器是集電能表校驗、電參量測試和檢測電網中發生波形畸變、電壓波動和三相不平衡等電能質量問題為一體的高精度測試儀器2、不停電、不改變計量回路、不打開計量設備情況下，在線實負荷檢測計量設備的綜合誤差3、精確測量電壓，電流，有功功率，無功功率，相角，功率因數，頻率等多種電參量，從而計算出測試設備回路的測量誤差4、可選配虛擬負載箱，當用戶無負荷或超低負荷時，也能對電表進行準確的測量5、可顯示被測電壓和電流的矢量圖，用戶可以通過分析矢量圖得出計量設備接線的正確與否。同時，在三相三線接線方式時，可自動判斷48種接線方式；追補電量自動計算功能，方便使用人員對接線有問題的用戶計算追補電量6、電流回路可使用鉗形互感器進行測量，操作人員無須斷開電流回路，就可以方便、安全的進行測量7、可校驗電壓表、電流表、功率表、相位表等指示儀表以及三相三線、三相四線、單相的1A、5A的各種有功和無功電能表8、可采用光電、手動、脈沖等方式進行電能表校驗9、測量分析公用電網供到用戶端的交流電能質量，可測量分析：頻率偏差、電壓偏差、電壓波動、三相電壓允許不平衡度和電網諧波10、可顯示單相電壓、電流波形并可同時顯示三相電壓、電流波形11、負荷波動監視：測量分析各種用電設備在不同運行狀態下對公用電網電能質量造成的波動。記錄和存儲電壓、電流、有功功率、無功功率、視在功率、頻率、相位等電力參數12、電力設備調整及運行過程動態監視，幫助用戶解決電力設備調整及投運過程中出現的問題13、測試分析電力系統中無功補償及濾波裝置動態參數并對其功能和技術指標作出定量評價14、具備萬年歷、時鐘功能，實時顯示日期及時間。可在現場校驗的同時保存測試數據和結果，并通過串口上傳至計算機，通過后臺管理軟件（選配件）實現數據微機化管理15、采用大屏幕進口彩色液晶作為顯示器，中文圖形化操作界面并配有漢字提示信息、多參量顯示的液晶顯示界面，人機對話界面友好16、體積小、重量輕，便于攜帶，既可用于現場測量使用，也可用做實驗室的標準計量設備產品參數Product parameters技術參數Technical parameters電壓測量范圍Voltage measurement range0400V，57.7V、100V、220V、400V四檔自動切換量程。0400V，F(xiàn)our parameters automatic switch range by 57.7V、100V、220V、400V.電流測量范圍Electric current measurement range05A，內置互感器分為5A(CT)檔。鉗形互感器為5A（小鉗）、25A（小鉗）、100A（中鉗）、500A（中鉗）、400A（大鉗）、2000A（大鉗）六個檔位。（其中中型鉗表和大型鉗表為選配）05A，internal current transformer sets 5A (CT) grade. split-core type current transformer shall be divided into 6 grades i.e. 5A(small clamp meter),25A(small clamp meter),100A(mid-size-clamp meter),500A(mid-size clamp meter),400A(large clamp meter) and 2000A(large clamp meter).(among which mid-size clamp meter and large clamp meter shall be optional)相角測量范圍Phase angle measurement range0359.999頻率測量范圍Frequency measurement range4555Hz準確度Degree of accuracy電壓Voltage：0.05%（0.1%）電流Current：0.05%（0.1%）（split-core type current transformer鉗形互感器0.5%）有功功率Active power：0.05%（0.1%）（split-core type current transformer鉗形互感器0.5%）無功功率Reactive power：0.3%（0.5%）（split-core type current transformer鉗形互感器1.0%）有功電能Active electric energy：0.05%（0.1%）（split-core type current transformer鉗形互感器0.5%）無功電能Reactive electric energy：0.3%（0.5%）（split-core type current transformer鉗形互感器1.0%）頻率Frequency：0.05%（0.1%）相位Phase：0.2電能質量Power quantity詳見說明書The details seeinstruction工作溫度Operating temperature10 +40絕緣Insulation 電壓、電流輸入端對機殼的絕緣電阻100MThe insulation resistance of voltage and current input end to case shall be 100M工作電源輸入端對外殼之間承受工頻1.5KV（有效值），歷時1分鐘實驗Withstand voltage of 1.5KV (effective value) at power frequency between work power input end and the shell for 1 minute duration of the test. 標準電能脈沖常數Standard power pulse constant詳見說明書。The details seeinstruction重量Weight 2kg體積Dimensions 32cm24cm13cm3.3 HTDN-3C三相功率電能校驗儀 HTDN-3C three phase power electric energy calibrator產品特征1、儀器是集電能表校驗、電參量測試和檢測電網中發生波形畸變、電壓波動和三相不平衡等電能質量問題為一體的高精度測試儀器2、不停電、不改變計量回路、不打開計量設備情況下，在線實負荷檢測計量設備的綜合誤差3、精確測量電壓，電流，有功功率，無功功率，相角，功率因數，頻率等多種電參量，從而計算出測試設備回路的測量誤差4、可選配虛擬負載箱，當用戶無負荷或超低負荷時，也能對電表進行準確的測量5、可顯示被測電壓和電流的矢量圖，用戶可以通過分析矢量圖得出計量設備接線的正確與否。同時，在三相三線接線方式時，可自動判斷48種接線方式；追補電量自動計算功能，方便使用人員對接線有問題的用戶計算追補電量6、電流回路可使用鉗形互感器進行測量，操作人員無須斷開電流回路，就可以方便、安全的進行測量7、可校驗電壓表、電流表、功率表、相位表等指示儀表以及三相三線、三相四線、單相的1A、5A的各種有功和無功電能表8、可采用光電、手動、脈沖等方式進行電能表校驗9、測量分析公用電網供到用戶端的交流電能質量，可測量分析：頻率偏差、電壓偏差、電壓波動、三相電壓允許不平衡度和電網諧波10、可顯示單相電壓、電流波形并可同時顯示三相電壓、電流波形11、負荷波動監視：測量分析各種用電設備在不同運行狀態下對公用電網電能質量造成的波動。記錄和存儲電壓、電流、有功功率、無功功率、視在功率、頻率、相位等電力參數12、電力設備調整及運行過程動態監視，幫助用戶解決電力設備調整及投運過程中出現的問題13、測試分析電力系統中無功補償及濾波裝置動態參數并對其功能和技術指標作出定量評價14、具備萬年歷、時鐘功能，實時顯示日期及時間?？稍诂F(xiàn)場校驗的同時保存測試數據和結果，并通過串口上傳至計算機，通過后臺管理軟件（選配件）實現數據微機化管理15、采用大屏幕進口彩色液晶作為顯示器，中文圖形化操作界面并配有漢字提示信息、多參量顯示的液晶顯示界面，人機對話界面友好16、體積小、重量輕，便于攜帶，既可用于現場測量使用，也可用做實驗室的標準計量設備產品參數Product parameters技術參數Technical parameters電壓測量范圍0400V，57.7V、100V、220V、400V四檔自動切換量程。Voltage measurement range0400V，F(xiàn)our parameters automatic switch range by 57.7V、100V、220V、400V.電流測量范圍Electric current measurement range05A，內置互感器分為5A(CT)檔。鉗形互感器為5A（小鉗）、25A（小鉗）、100A（中鉗）、500A（中鉗）、400A（大鉗）、2000A（大鉗）六個檔位。（其中中型鉗表和大型鉗表為選配）05A，internal current transformer sets 5A (CT) grade. clamp type current transformer shall be divided into 6 grades i.e. 5A(small clamp meter),25A(small clamp meter),100A(mid-size-clamp meter),500A(mid-size clamp meter),400A(large clamp meter) and 2000A(large clamp meter).(among which mid-size clamp meter and large clamp meter shall be optional)相角測量范圍Phase angle measurement range0359.999頻率測量范圍Frequency measurement range4555Hz準確度Degree of accuracy電壓Voltage：0.05%（0.1%）電流Current：0.05%（0.1%）（鉗形互感器clamp type current transformer0.5%）有功功率Active power：0.05%（0.1%）（鉗形互感器clamp type current transformer0.5%）無功功率Reactive power：0.3%（0.5%）（鉗形互感器clamp type current transformer1.0%）有功電能Active electric energy：0.05%（0.1%）（鉗形互感器clamp type current transformer0.5%）無功電能Reactive electric energy：0.3%（0.5%）（鉗形互感器clamp type current transformer1.0%）頻率Frequency：0.05%（0.1%）相位Phase：0.2電能質量Power quantity詳見說明書The details seeinstruction工作溫度Operating temperature10 +40絕緣Insulation 電壓、電流輸入端對機殼的絕緣電阻100MThe insulation resistance of voltage and current input end to case shall be 100M工作電源輸入端對外殼之間承受工頻1.5KV（有效值），歷時1分鐘實驗Withstand voltage of 1.5KV (effective value) at power frequency between work power input end and the shell for 1 minute duration of the test.標準電能脈沖常數Standard power pulse constant詳見說明書。The details seeinstruction重量Weight 2kg體積Dimensions32cm24cm13cm3.4 HTGK-III高壓開關動特性測試儀 HTGK-III high-voltage switch dynamic characteristic tester一、產品特性：1、時間：12個斷口的固有分、合閘時間，同相同期、相間同期2、重合閘：高壓開關動特性測試儀每斷口的合分，分合，分合分；過程時間：一 分時間、一合時間、二合時間、金短時間、無電流時間值3、彈跳：每斷口的合閘彈跳時間，彈跳次數，彈跳過程，彈跳波形；每斷口的分閘反彈幅值4、速度：剛分、剛合速度，最大速度，時間行程特性曲線5、行程：總行程，開距，超行程，過沖行程，反彈幅值6、電流：分、合閘線圈的分、合閘電流值、電流波形圖7、動作電壓：機內提供DC30250V/20A數字可調斷路器動作電源，自動完成斷路器的低電壓動作試驗，測量斷路器的動作電壓值二、技術參數：Technical parameters:1、使用環境：operating environment:輸入電源：220V10% 50Hz10%，大氣壓力：86106kpaInput power：220V10% 50Hz10%;atmospheric pressure：86106kpa溫度：1040，濕度：80%RHTemperature：1040; Humidity：80%RH2、安全性能：safety performance絕緣電阻：2MInsulation resistance：2M介電強度：電源對機殼工頻1.5KV耐壓1分鐘，無閃絡與飛弧。Dielectric strength: withstand duration of electric power of 1.5KV to the case under power frequency shall last for 1 minute without flashover and arc-over.3、基本參數：basic parameters:時間：量程：4000.0ms，分辨率：0.1msTime: measurement range: 4000.0ms, resolution ratio: 0.1ms誤差：100ms以內，0.1ms1個字 Error: within 100ms, 0.1ms1d100ms以上，0.1%1個字Above 100ms 0.1%1同期 simultaneously 速度：量程：20.00m/s，分辨率0.01m/sRate: measurement range: 20.00m/s, resolution ratio: 0.01m/s.誤差：02m/s以內，0.1m/s1個字 Error: within 02m/s, 0.1m/s1 digit100ms以上，0.2m/s1個字 above 100ms, 0.1m/s1 digit行程：travel distance量 程measurement range分辨率resolution ratio誤 差error真空vacuum斷路器breaker50.0mm0.1mm1%1個字SF6斷路器SF6 breaker300.0mm1mm少油斷路器Oil-minimum breaker600.0mm電流electric current：量程measurement range: 20.00A，分辨率resolution ratio: 0.01A輸出電源：DC30250V數字可調/20A(瞬時工作)Output power: DC30250V digital adjustable/20A(instantaneous)外形尺寸(長寬高)：360280300mm3Overall dimensions(length*width*height): 360280300mm3重量：9kgWeight: 9kg3.5 SMG-2000B數字雙鉗相位伏安表 SMG-2000B Digital dual-phase voltammetry table clamp一：產品特性Product characteristic1、耐壓Withstand voltage 電壓輸入端與表殼之間、鉗形電流互感器(電流鉗)鐵芯與鉗柄及副邊繞組線圈之間能承受1000V/50Hz、兩電壓輸入端之間能承受500V/50Hz的正弦波交流電壓歷時1min的試驗The gauge is able to withstand 1 min test under sine wave AC 1000V