1、 一注塑CAE技術簡介 CAEComputer Aided Engineering技術從字面上理解是計算機輔助工程，準確地講就是工程設計中的分析計算和模擬仿真。注塑CAE技術是CAE技術中一個重要的組成部分，它是根據塑料加工流變學和傳熱學的。

2、 1 to on s is of be of a to or to of AE in to of to of in to a is an of 1 AE AE is on of in in of of of of an 0th 60 of to a 2 in of At a 0 a 70 to 0 AE to a to of 0 of a is in of a 2 AE of of on of is or of to of so in to of to an of AE is of AE in in in to as or in of to of as so be to of in to 3 of AE as (1) of of of of a on of to AE to (2) be of to On of (3) to of to AE in of to or so 3 AE To a AE (000, is an s in in Z in is in AE 4 s of 976, s of AE a AE 004, AE in of 5%. 。

3、CAE技術注塑模具設計研究 摘要： 塑料熔體在成型過程中會經歷非常復雜的流動過程和傳熱過程，如果在注塑模具設計中引入CAE技術，采用分析和模擬模擬設計方案取代之前的實際試模，以便提前發現存在的技術缺陷，并對此做出及時修改。本文主要對注塑模內流動與傳熱數值分析理論進行了簡要闡述，并通過實例闡述了如何在注塑模具設計中利用CAE技術以及如何利用該技術解決出現的問題。 關鍵詞： 注塑成型；CAE；。

4、Injection Molding CAE Technology0 Introduction Plastic products from product design to production, including molding pla。

5、蘇州大學本科生畢業論文設計 摘要 本文主要介紹了薄壁凸臺套筒注塑模具的設計過程，以ProECAD等繪圖工具為基礎，對注塑模具的結構進行了詳細設計，完成了模具的裝配圖以及主要零件的零件圖。設計過程中，分析了塑件的結構成型工藝可行性，介紹了模具。

6、蘇州大學本科生畢業論文設計薄壁凸臺套筒注塑模具設計及CAE分析摘要本文主要介紹了薄壁凸臺套筒注塑模具的設計過程，以ProECAD等繪圖工具為基礎，對注塑模具的結構進行了詳細設計，完成了模具的裝配圖以及主要零件的零件圖。設計過程中，分析了塑件。

7、 1 to on s is of be of a to or to of AE in to of to of in to a is an of 1 AE AE is on of in in of of of of an 0th 60 of to a 2 in of At a 0 a 70 to 0 AE to a to of 0 of a is in of a 2 AE of of on of is or of to of so in to of to an of AE is of AE in in in to as or in of to of as so be to of in to 3 of AE as (1) of of of of a on of to AE to (2) be of to On of (3) to of to AE in of to or so 3 AE To a AE (000, is an s in in Z in is in AE 4 s of 976, s of AE a AE 004, AE in of 5%. 。

8、鼠標蓋一模兩 腔的注塑成型 究 摘 要 塑料制品因其質量輕、美觀、便捷、易加工等特點，越來越受到人們的青睞，逐 漸滲透到人們生活的方 方面面。塑料工業取得突飛猛進的發展，進而也促使塑料模具 工業的空前進步 。 塑料加工成型的方法有很多種 。 其中注塑成型因其效率高 、 精度 高 、 成本低、周期短等顯著的優點，成為最普遍最常用的塑料加工成型的方法。在實際的 工業生產中，企業為了進一步的提高生產效率，往往采用一模多腔的模具進行生產。 尤其是不同制件組合型腔的生產方式更受企業歡迎。對于不同制件組合型腔注塑成型 工藝過程。

9、 外文翻譯 Injection Molding CAE Technology 0 Introduction Plastic products from product design to production, including molding plastic products design, mold design, mold manufacturing and injection mold。