購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
電動機風扇罩正反拉深模
摘 要
以電動機風扇罩零件為例，結合其模具設計特有工藝性，進行了工藝性分析，并分析了成形過程的三種不同的沖壓工藝方案，從理論探討及實驗上提出了最佳工藝方案。介紹了模具設計要點、結構分析、工作原理；并對模具的各部分主要尺寸進行理論運算，以確定各沖模的尺寸；對拉深模從設計到零部件的加工工藝以及裝配工藝等進行了詳細闡述，簡要分析了模具關鍵零部件的設計及加工工藝。實踐證明，模具結構能很好地滿足零件的精度要求，不僅模具結構左右對稱，而且受力均勻。
關鍵詞： 風扇罩 工藝性分析 拉深模 裝配工藝
Drawing Dies of Wind machine hood
Abstract
Taking wind machine hood as an instans,combining with its special of die design,the process analysis ,and three kinds of different stamping technique plans were analyzed, optimal processing plan and feasible forming die were obtained according to theoretical analysis and experiment. The critical points of die design are introduced, the theoretical calculation to the main dimensions of die are carried out so as to determine the size of different punching dies; the die design and the process of parts as well as the assembling process and drawing die are stated in details,the design and manufacture process of the key part of the die were also discussed in brief. Practical application showed,that the die structure could meet the require meet the spare parts accuracy ,not only are the die structure symmetrical,but also force condition.
Key words: wind machine hood processing analysis drawing die assembling process