購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。?！咀ⅰ浚篸wg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814
（線圈骨架的成型工藝及模具設計）
摘 要
此設計題目為一個線圈骨架，此塑件在技術要求方面要求不高，所以模具設計的精度也不需要太高。通過對不同設計方案的對比，最終確定設計方案為：
（1）分型面選在零件高度為5mm的地方；（2）模具設計為一模兩腔式的制件布局；（3）模具采用了斜導柱側抽機構。
由于設計的能力有限，設計過程中還存有許多不足之處，但經過精確的計算和校核，此套模具能夠加工所需的合格制件，再加上制件的精度要求不是很高，所以此模具可以投入生產使用。
關鍵詞： 分型面 一模兩腔 斜導柱
Confectioning technology and die design of coil frame
Abstract
The topic of this design is a coil framework.The request of this plastics in the aspects of technique requesting is not high, so the accuracy of the molding tool design also does not request too high. Pass to the contrast of the different design project, end certain design project is: (1) The cent type chooses is the place of the 5 mm in the spare parts high degree; (2) the type of molding design is a mold two the system a distribution; (3) the molding adopted the inclined leading the pillar side take-out organization.
Because designing the ability limited, there are still many not enough places in the design process. But through accurate calculation, this set of molding tools can process a qualified the piece of system for needing. Plusing the accuracy of the piece of system request is not very high, so this molding tool can be using in the production.
Keyword ： partsurface a mold two the system inclined leading