購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載可得到資源目錄里的所有文件。。。【注】：dwg后綴為CAD圖紙，doc,docx為WORD文檔，原稿無水印，可編輯。。。具體請見文件預覽，有不明白之處，可咨詢QQ:12401814

哈爾濱工程大學本科生畢業論文 摘 要 康復機器人技術則是近年來迅速發展的一門新興機器人技術，是機器人 技術在醫學領域的新應用；目前康復機器人已成為國際社會研究的熱點之一。 本課題主要研究的基于姿態控制步態康復訓練系統的設計。 本文介紹了下肢康復機器人國內外發展現狀和應用情況，進行了步態訓 練機器人的總體方案設計、結構設計，和總體控制方案設計等；對步態訓練 機器人進行三維建模，并對重要零件進行校核。本步態訓練機器人共有 7 個 自由度，其中每一條機械腿上有 3 個關節（3 個自由度）模仿人體腿上的踝 關節、膝關節、髖關節和一個用于減重的減重系統（包括 1 個自由度） 。此 系統能用于腦損傷、中風等病人的步態康復訓練，幫助病人更好地進行康復 訓練，減輕他人的幫助，挺高效果。 關鍵詞：康復訓練；機器人；步態 哈爾濱工程大學本科生畢業論文 ABSTRACT The rehabilitation robot technology is a new robot technology developed rapidly recently, which is a new application in medical fields of robot technology. Currently the research on rehabilitation robot has been one of the focuses in the International Society. The rehabilitation robot technology is a synthesis of many subjects, which covers mechanics, electronics, control and rehabilitative medicine and so on; it has been a typical representation of the mechatronics research. The main research of this paper is based on the attitude control gait rehabilitation training system design. In this paper, lower extremity rehabilitation and development of robot applications at home and abroad, a gait training robot's overall programme design, structural design, design and overall control; gait training on the robot for three- dimensional modeling, and important parts to check. The robot gait training has a total of seven degrees of freedom, each of which a mechanical leg joints have three (3 DOF) to imitate human leg ankle, knee, hip and a weight relief for weight relief system (including a degree of freedom). The system can be used for brain injury, stroke, and to help patients better rehabilitation training, and meets.the needs of different groups of people. Key words：rehabilitation training; robot; gait 哈爾濱工程大學本科生畢業論文 目 錄 第 1 章 緒論 .......................................................................................1 1.1 概述 .....................................................................................................1 1.2 康復機器人的國內外研究現狀 .........................................................2 1.3 本課題主要研究內容 .........................................................................7 第 2 章 總體方案設計與選擇的論證 .......................................................8 2.1 步態分析 .....................................................................................................8 2.2 方案的選擇 ...............................................................................................11 2.2.1 自由度的設計 .....................................................................................13 2.2.2 基本參數的選取 .................................................................................13 2.2.3 驅動器的選擇 .....................................................................................14 2.2.4 關節結構的選擇 .................................................................................14 2.2.5 連桿結構的選擇 .................................................................................14 2.2.6 腰部結構設計 .....................................................................................15 2.2.7 減重機構 .............................................................................................15 2.2.8 整體結構設計 .....................................................................................16 2.3 本章總結 ...................................................................................................16 第 3 章 機械結構的設計與計算及驅動元件選型 ..............................17 3.1 人體參數 ...................................................................................................17 3.2 各關節運動學分析 ...................................................................................17 3.2.1 踝關節的運動學分析 ............................................................................18 3.2.2 膝關節的運動學分析 ...........................................................................18 3.2.3 髖關節的運動學分析 ...........................................................................19 3.3 關節力矩分析 ...........................................................................................20 3.4 具體結構設計 ...........................................................................................21 3.4.1 關節結構的選擇 .................................................................................21 3.4.2 連桿結構的選擇 .................................................................................22 3.4.3 腰部結構設計 .....................................................................................23 3.4.4 減重機構 .............................................................................................23 3.4.5 整體結構設計 .....................................................................................24 哈爾濱工程大學本科生畢業論文 3.5 一些零件的設計和校核 ...........................................................................25 3.5.1 軸承的選擇及校核 ...............................................................................25 3.5.2 氣缸的選擇 ...........................................................................................25 3.5.3 連桿的計算與校核 ...............................................................................27 3.5.4 銷軸的校核 ...........................................................................................29 3.5.5 雙頭螺柱的校核 ...................................................................................30 3.5.6 傳感器的選取 .......................................................................................30 3.6 減重系統分析及相關計算 .......................................................................31 3.7 本章小結 ...................................................................................................32 第 4 章 供氣與控制系統的設計 ..............................................................33 4.1 供氣系統的設計 .......................................................................................33 4.1.1 供氣回路設計 .....................................................................................33 4.1.2 氣動元件的選擇 .................................................................................34 4.2 康復機器人的訓練方式 ...........................................................................39 4.3 氣動自動控制方框圖 ...............................................................................39 4.4 本章小結 ...................................................................................................40 結 論 .............................................................................................................41 參考文獻 .............................................................................................................42 致 謝 .............................................................................................................45