179 關節旋轉式機械手控制系統與MCGS仿真,關節,旋轉,機械手,控制系統,mcgs,仿真 關節旋轉式機械手控制系統與 MCGS 仿真摘 要在工業生產和其他領域內，由于工作的需要，人們經常受到高溫、腐蝕及有毒氣體等因素的危害，增加了工人的勞動強度，甚至于危及生命。自從機械手問世以來，相應的各種難題迎刃而解。在本設計中介紹了國內外機械手研究現狀及 PLC 的研究發展趨勢，描述了機械手控制系統的工作原理和動作實現過程。研究了基于 PLC 的機械手模型控制系統的設計，還研究了 MCGS 在機械手控制系統中的應用。利用組態軟件 MCGS 設計了機械手模型控制系統監控界面，提供了較為直觀、清晰、準確的機械手運行狀態，進而為維修和故障診斷提供了多方面的可能性，充分提高了系統的工作效率。關鍵詞：機械手；PLC；MCGS AbstractIn industrial production and other domains, Because of the demands of the work, people were usually subjected to endanger of heat, decay and poisonous air etc. factor, these factors increased the strength of worker's labor, even endanger life. Since the manipulator was born, the various difficult problems were easily solved.In this design the present condition of research about domestic and international manipulator and development trend of research concerning PLC were introduced. The principle of work and the process of action’s realization of manipulator control system were described. The design of manipulator model control system based on PLC was researched and MCGS’s application in the manipulator model control system was researched. The interface of supervision for the manipulator model control system was designed by MCGS. An intuitive, clear and accurate manipulator operating state was provided. And then various possibilities for maintain and breakdown’s diagnosis were provided, the work’s efficiency of system was fully elevated.Key words: manipulator; PLC; MCGS