3775 油茶墾復機中間傳動系統的設計,油茶,墾復,中間,傳動系統,設計 IJIANGXI AGRICULTURAL UNIVERSITY本 科 畢 業 論 文（設 計）題目： 油茶墾復機中間傳動系統的設計 學 院： 工 學 院 姓 名： 彭 星 亮 學 號： 20080945 專 業： 機械設計制造及其自動化 年 級： 機制 081 指導教師： 饒洪輝 職 稱： 講師 二 0 一二 年 五 月II摘 要?dú)v年來的豐產經驗證明：抓緊夏季墾復荒山，加強熟山中耕培育，是保證全面油茶大豐收的主要關鍵。油茶地經墾復后土壤疏松,保水保肥,促進茶株根系發育,春季所發新梢數、梢長、新葉數、花芽數分別比不墾復的增加48.5%、118.7%、11.5%和 88 ? 7%,而且茶籽千粒重增加 0.7 一 3.3 公斤,畝產量增加 11.7 一 39.2 公斤,增產 15.7%一 81.6%。所謂的墾復是指翻耕荒蕪的茶山而言，其目的在于：消除雜草灌木，促進土壤風化，故宜用深挖。墾復的深度視情況而定，一般７～８寸。本課題運用制圖軟件對油茶墾復機中間傳動進行機構設計，其中包括中間傳動，側邊的傳動，旋轉鍬的設計。通過蝸輪蝸桿的變向?qū)恿鞯絺?cè)邊，使用大小齒輪實現減速后傳給刀，既解決了側邊傳動耕幅較小的問題，也實現了低速、高效率的墾復要求。關鍵字：油茶，墾復機，中間傳動，設計IIIAbstractOver the years the high yield experience proves: hold summer cultivation of barren mountain, strengthen cultivation cultivation is to ensure that the cooked hill, comprehensive bumper harvest of Camellia tea. Camellia tea by reclamation after loose soil, fertilizer and water conservation, the promotion of tea plant root development, spring hair shoot number, shoot length, leaf number, new flower bud number were less than48.5%,118.7% increase in the county,88,11.5% and7%, and the tea seed weight increased by 0.73.3kg, yield increase11.739.2 kilograms, increase production 15.7%81.6%. The so-called reclamation is plowed barren mountain, its purpose is: to eliminate weeds shrubs, to promote soil weathering, therefore suitable for deep. Reclamation of depth depending on the situation, general 7 ~8 inch. The subject of the use of mapping software on Camellia tea cultivating machine intermediate transmission mechanism design, including the intermediate drive, side drive, rotary shovel design. Through the worm gear turning to power side, using the size gear speed reducing unit to the cutter, which solves the side driving the tilling amplitude is smaller, but also to achieve a low, efficient reclamation requirements.Keywords: tea, cultivating machine, an intermediate transmission, designIV目錄１ 緒　 論 ..............................................................................................................................11.1 　 引 言 ...........................................................................................................................11.2　 油茶墾復的簡介 .........................................................................................................1２油茶墾復機的工作原理 ......................................................................................................22.1　 油茶墾復機的工作方式 ..............................................22.2　 油茶墾復機傳動的選擇 ..............................................22.3　 油茶墾復機的耕作機具的選擇 ........................................22.4 油茶墾復機的工作原理的總圖 ........................................32.4.1 油茶墾復機工作原理簡述 .........................................32.4.2 油茶墾復機的三維裝配圖 .........................................42.4.3　 油茶墾復機的傳動機構的二維圖 ..................................52.5 油茶墾復機的耕作機具 ...............................................62.5.1 旋耕刀的部分原理圖 .............................................62.5.2 旋耕刀的部分原理說明 ...........................................63 油茶墾復機中間傳動的設計 ...............................................73.1 傳動機構的設計 ............................................................................................................73.1.1 中間傳動機構簡圖 .................................................................................................73.1.2 中間傳動系統部分的原理簡述 .............................................................................73.1.3 旋耕鍬的技術參數 .................................................................................................73.2 傳動比的確定 ................................................................................................................83.3 齒輪的設計 ....................................................................................................................83.3.1 錐齒輪的基本幾何尺寸 .........................................................................................83.3.2 直齒圓柱齒輪的的設計 .........................................................................................83.4 傳動軸的設計 .............................................................................................................113.4.2 初步計算軸上各段長度 ....................................................................................113.4.3 軸的結構設計： ................................................................................................113.4.4.繪制軸的彎扭矩圖，對危險截面進行校核 .......................................................123.5 軸承的校核 .................................................................................................................143.5.1 計算軸承的當量動載荷 P： ...............................................................................143.5.2 校核計算 ..............................................................................................................143.5.3 軸上鍵連接的選擇及校核 ................................................................................153.5.4 軸上螺母的選擇 ...................................................................................................153.6 懸掛機構的設計 ..........................................................................................................163.7 耕作機具的設計 .........................................................................................................18４總結 ..................................................................19參 考 文 獻 .............................................................20致謝 ....................................................................21