【溫馨提示】 dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，請見壓縮包內的文件及預覽，所見才能所得，請細心查看有疑問可以咨詢QQ：414951605或1304139763
摘 要
數控機床即數字程序控制機床，是一種自動化機床，數控技術是數控機床研究的核心，是制造業實現自動化、網絡化、柔性化、集成化的基礎。隨著制造技術的發展，現代數控機床借助現代設計技術、工序集約化和新的功能部件使機床的加工范圍、動態性能、加工精度和可靠性有了極大的提高。
本文主要對XK5040數控立式銑床及控制系統進行設計，首先分析立式銑床的加工特點和加工要求確定其主參數，包括運動和動力參數；根據主參數和設計要求進行主運動系統、進給系統和控制系統硬件電路設計。主要進行主運動系統和進給系統的機械結構設計及滾珠絲杠和步進電機的選型和校核；對于控制系統由于這里主要針對經濟型數控銑床的設計，這里采用步進電機開環控制，計算機系統采用高性能價格比的MCS-51系列單片擴展系統，主要進行中央處理單元的選擇、存儲器擴展和接口電路設計。
由于本文采用8031單片機控制系統，因此，設計出的立式銑床性能價格比高，滿足經濟性要求。可實用于加工精度較高的場合。
關鍵詞 數控技術，立式銑床，設計
ABSTRACT
The numerical control engine bed is the digital process control engine bed, is one kind of automated engine bed, the numerical control technology is the core which the numerical control engine bed studies, is the manufacturing industry realization automation, the network, the flexibility, the integrated foundation. Along with the manufacture technology development, the modern numerical control engine bed with the aid of the modern design technology, the working procedure intensification and the new function part caused the engine bed the processing scope, the dynamic performance, the processing precision and the reliability had the enormous enhancement .
This article mainly carries on the design to the XK5040 numerical control vertical milling machine and the control system, first analyzes the vertical milling machine the processing characteristic and the processing request determines its host parameter, including movement and dynamic parameter; Carry on the host kinematic scheme according to the host parameter and the design request, enters for the system and the control system hardware circuit design. Mainly carries on the host kinematic scheme and enters for the system mechanism design and the ball bearing guide screw and electric stepping motor shaping and the examination; Regarding control system because here mainly aims at the economy numerical control milling machine the design, here uses electric stepping motor open-loop control, the computer system uses the high performance price compared to the MCS-51 series monolithic expansion system, mainly carries on the central processing element the choice, the memory expansion and the connection circuit design .
Because this article uses 8,031 monolithic integrated circuits control system, therefore, designs the vertical milling machine performance price is higher than, satisfies the efficient request. But practical to processing precision higher situation .
Key words：Numerical control technology， Vertical milling machine，Design
目 錄
摘 要 1
1 總體設計 5
1.1、銑床簡介 5
1.2、 XK5040型數控銑床的總體布局、主要技術參數及總傳動系統圖 5
1.2.1 XK5040型數控銑床的總體布局 5
1.2.2 XK5040型數控銑床的主要技術參數 6
1.2.3 總傳動系統圖 8
2 主運動系統設計 9
2.1 傳動系統設計 9
2.1.1參數的擬定 9
2.1.2 傳動結構或結構網的選擇 9
2.1.3 轉速圖擬定 11
2.1.4齒輪齒數的確定及傳動系統圖的繪制 13
２.２ 傳動件的估算與驗算 16
2.2.1傳動軸的估算和驗算 16
２.２.２齒輪模數的估算 19
２.３ 展開圖設計 24
２.３.１結構實際的內容及技術要求 24
２.３.２ 齒輪塊的設計 25
２.３.３ 傳動軸設計 27
２.３.４ 主軸組件設計 30
２.４ 制動器設計 35
２.４.１ 按扭矩選擇 35
２.５ 截面圖設計 36
２.５.１ 軸的空間布置 37
２.５.２ 操縱機構 37
２.５.３ 潤滑 37
２.５.４箱體設計的確有關問題 38
３ 進給系統設計 40
３.１ 總體方案設計 40
３.１.１對進給伺服系統的基本要求 40
３.１.２進給伺服系統的設計要求 40
３.１.３總體方案 40
３.２ 進給伺服系統機械部分設計 41
３.２.１確定脈沖當量，計算切削力 41
３.２.２滾珠絲桿螺母副的計算和造型 43
３.２.３齒輪傳動比計算 51
３.２.４ 步進電機的計算和選型 52
３.２.５ 進給伺服系統機械部分結構設計 62
４ 控制系統設計 66
4.1繪制控制系統結構框圖 66
4.2.選擇中央處理單元（CPU）的類型 66
4.3存儲器擴展電路設計 67
４.３.１程序存儲器的擴展 67
４.３.２ 數據存儲器的擴展 68
４.４?I/O接口電路及輔助電路設計 68
４.４.１ ?I/O接口電路設計 68
４.４.２ 步進電機接口及驅動電路 69
４.２.３ 其他輔助電路 70
參考文獻 73
致謝 74
附 錄（英文翻譯及實習報告） 75