【溫馨提示】 dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，請見壓縮包內的文件及預覽，所見才能所得，請細心查看有疑問可以咨詢QQ：414951605或1304139763
黑龍江工程學院本科生畢業設計 I 摘 要 作為汽車關鍵零部件之一的車橋系統也得到相應的發展，在一般的汽車結構中， 驅動橋包括主減速器(又稱主傳動器)、差速器、半軸及橋殼等部件。單級主減速器 通常由主動齒輪和從動齒輪組成。在雙級主減速器中，通常還要加一對圓柱齒輪或 一組行星齒輪。在輪邊減速器中則常采用普通平行軸式布置的斜齒圓柱齒輪傳動或 行星齒輪傳動。主減速器采用的最廣泛的是螺旋錐齒輪和雙曲面齒輪。 本設計首先參考類似驅動橋主減速器的結構對比優缺點，確定出總體設計方案； 然后確定主要部件的結構型式和主要設計參數；最后對主，從動錐齒輪，差速器圓 錐行星齒輪，半軸齒輪，全浮式半軸進行校核以及對支承軸承進行了壽命校核。并 對主減速器主動錐齒輪進行有限元分析。本設計采用傳統的雙曲面錐齒輪式單級主 減速器作為 CA1090 的主減速器。 關鍵詞: CA1090；主減速器；雙曲面錐齒輪；軸承；行星齒輪；有限元分析 黑龍江工程學院本科生畢業設計 II ABSTRACT One of the key components of a vehicle bridge system has also been a corresponding development of the automobile in the general structure, including the main gear axle (also known as the main drive device), differential, axle and axle housing and other components. Usually single-stage final drive gear and driven gear components. In the two-stage final drive, usually also add a pair of spur gear or a group of planetary gears. Reducer in the wheel is usually arranged by common parallel shaft helical gears or planetary gears. Final drive is the most widely used spiral bevel gear and hypoid gear. The drive axle design similar to the first reference to the structure of comparative advantages and disadvantages of the main gear, determined the overall design scheme; and then identify the main components of the structure type and the main design parameters; Finally, the driving and driven bevel gear, planetary gear differential cone, axle gear, full floating axle bearings were checked and were on life support check. Bevel gear final drive and initiative to the finite element method. This design uses a traditional-style hypoid bevel final drive as the CA1090 single-stage main gear. Key word: CA1090; Main Gear; Hypoid Gears; Bearing; Planetary Gear；FEA