彎曲板件的沖壓成形工藝及模具設計【帶孔斜口U形件彎曲模含13張CAD圖】
【需要咨詢購買全套設計請加QQ1459919609】圖紙預覽詳情如下：
彎曲板沖壓成形工藝及模具設計摘要：本設計題目為彎曲件模具設計，體現了典型彎曲模的設計要求、內容及方向，有一定的設計意義。通過對該零件模具的設計，進一步加強了設計者彎曲模設計的基礎知識，為設計更復雜的彎曲模具做好了鋪墊和吸取了更深刻的經驗。本設計運用彎曲成型工藝及模具設計的基礎知識，首先分析了板材的性能要求，為選取模具的類型做好了準備；然后計算了彎曲件的彎曲力，便于選取壓力機噸位及確定壓力機型號；最后分析了彎曲件的特征，確定模具的設計參數、設計要點及頂出裝置的選取。本設計采用了斜楔復合模成型件。復合模具有生產效率高，制件精度高等特點，特別適合大批量高精度生產。成型原理可劃分為兩個階段：首先，凸模與凹模共同作用成型 U 形件；凹模繼續下行，迫使擺塊左右擺動動作，U 型件被再次彎曲成型，最后成型件，這種機構動作靈活可靠，設計方便，非常適合在本副模具中使用。關鍵詞：彎曲模 凸模 凹模 斜楔 Bending plate stamping process and die designed ABSTRACT： The requirement，content and direction of the design of the bending dies parts are embodied on this bending dies design. The designer’s foundation knowledge of the bending dies design is reinforced and is able to design more complex injection mould through the design. Through the foundation knowledge, firstly, the composion and the perfourmance of the flat sheet is analyzed to choose the type of the mould. Secondly, the volume of the bend is estimated to choose the press molding machine and to detemine the type press machine and tonnage of press. Lastly the character of the part is analyzed to determine the mould design parameter and design point and choose the ejection assembly. Oblique block compound die is used in this design to form the part.the compound die can produce pierced blanks to close flatness and dimensional tolerances. Compound die’sproduce efficiency and part precision is hight. Especially fit for volume produce and hight precision produce.Moulding of the part is like this :Fist,behing punch and die’s together operation, the part is form to the fast bending ;die is going down, swing block is flogged to work, and the second bending is begin. At last, the part is form to part. So, it is adapted to be used on this mould extraordinarily.Keywords: bending dies , punch , dieg, oblique block