500開坯線材軋機設計,線材,軋機,設計 鞍山科技大學本科生畢業設計 第II頁 500開坯線材軋機設計 摘 要 線材的用途很廣，在國民經濟各個部門中，線材占有重要地位。據有關資料統計，各國線材產量占全部熱軋總量的5.3～15.3﹪。近年來，對線材性能及表面質量的要求越來越高。尤其是對線材化學成分，機械性能，晶粒組織及晶粒粒度都要做檢驗，符合標準方可出廠。所以，對線材的苛刻要求決定了新軋機及相關新技術的飛速發展。 本次設計是對線材生產中的粗軋機（開坯機）部分進行設計。首先，根據軋制工藝對軋輥基本尺寸進行了設計，然后又根據軋制力矩選擇了電機。在主傳動系統中，對軋輥進行了受力分析和必要的強度校核，對機架也做了相應的校核。在設備改進方面，對H架進行了改進，改善了它的受力情況,提高了使用壽命。 通過本次設計使我對冶金機械的設計有了新的認識。但是，這其中還有很多的不足需要改進。能夠完成本次設計離不開學院老師的支持，在此僅代表個人對提供幫助的老師表示衷心的感謝。 關鍵詞：線材生產，開坯機，主傳動 A Design of 500 Wire rod Rolling Mill Abstract As the use of wire rod is very broad, In every department of national economy, Wire rod possess important position. According to relevant information statistics, The countries output of wire rod take amount of the completely hot-roll products 5.3 ～ 15.3 ﹪. In recent years, For the requirement of the surface quality and performance of wire rod, it is more and more higher.So many parameters to be inspected, especially for the chemical composition ,mechanical performance, Crystal microscopic organizes and Crystal microscopic size of wire rod, accord with standard side can be sold out. So new rolling mill and related new technology should be developed fast for the harsh requirement of wire rod. My design is aim to design for wire rod boil Pei rolling mill.First, According to rolling technology , the basic size of roll is designed , and then have selected motor according to rolling force.In main drive system, the strength of roll is also analysed, including the forces given to the rolls. The strength of the frame be analysed clearly.In the aspect of equipment improvments,H-bridle is an episode. During this span of over four months,new conception of machinical design have been improved.But several shortcomings also exist. Professors especially Professor Wang give contributions to me.So I am on behalf of myself to give thanks to all of them. Key-words:produce of wire rod, rolling mill,main drive