新型絲杠磨床砂輪修整器設計,新型,磨床,砂輪,修整,設計  南京理工大學紫金學院 畢業設計說明書(論文) 作 者: 楊士吉 學 號： 060104251 系： 機械工程系 專 業: 機械工程及自動化 題 目: 新型絲杠磨床砂輪修整器設計 講師 陶衛軍 指導者： (姓 名) (專業技術職務) 評閱者： (姓 名) (專業技術職務) 2010 年 5 月 畢業設計說明書（論文）中文摘要 本文對砂輪修整器作了較為系統的介紹，講述了砂輪修整器的歷史背景和將來的發展方向?；谏拜喰拚鞯陌l(fā)展現狀，提出了一種新型絲杠磨床砂輪修整器結構。在設計過程中，對其結構進行了分析，使其能夠完成修整砂輪外輪廓的動作。修整砂輪時修整輪與被修整輪的接觸面能夠保持垂直。對該機構進行了簡單的受力分析；確定了各個零件的尺寸，并運用Pro/E軟件設計出各零件的三維結構和組裝圖。用CAD軟件畫出了零件圖和裝配圖。通過之前的計算選取電機，最后完成該機構的設計。 關鍵詞 修整器 機械設計 絲杠磨床 畢業設計說明書（論文）外文摘要 Title Design of A Newtype Grinding wheel Dresser for lead Screw Grinding Machine. Abstract In this paper, a newtypes griding wheel dresser was introduced. The historical background of grinding wheel dresser and future direction was described. Through the understanding of grinding wheel dresser, had a new screw design of grinding wheel dresser. In the design process, its structure was analyzed, so that it can complete trimming the outline of the griding wheel. The paper achieved when the dressing wheel and the contact was maintained vertical. Then the force of its simple analysis carried out to determine the size of each part, and use Pro/E software to design three-dimensional map of parts and assembly diagram. Using CAD software to draw diagrams and assembly drawings of parts. Selected by the calculation before the motor, the mechine was completed. Keywords Dresser Mechanical Design lead Screw Grinding Machine