【溫馨提示】 dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，請見壓縮包內的文件，所見才能所得，下載可得到【資源目錄】下的所有文件哦--有疑問可咨詢QQ:1304139763 或 414951605
目 錄
摘要……………………………………………………………………………………………1
關鍵詞…………………………………………………………………………………………1
Abstract………………………………………………………………………………………1
Key words………………………………………………………………………………………1
引言……………………………………………………………………………………………2
1.機械手設計要求分析………………………………………………………………………3
1.1 設計目的和要求…………………………………………………………………………3
1. 2機械手簡介與分析………………………………………………………………………3
2. 液壓系統設計………………………………………………………………………………3
2.1確定工作循環周期………………………………………………………………………4
2.2工況分析…………………………………………………………………………………4
2.3擬訂液壓系統工作原理圖………………………………………………………………4
2.4選擇標準的液壓元件……………………………………………………………………5
2.5 液壓缸尺寸的確定及安全強度的校核………………………………………………5
3. 集成塊設計……………………………………………………………………………… 7
3.1設計分析…………………………………………………………………………………7
3.2設計計算…………………………………………………………………………………8
3.3設計步驟…………………………………………………………………………………10
3.4液壓集成塊加工工藝……………………………………………………………………12
4. 液壓集成塊 CAD技術……………………………………………………………………13
總結 …… ……… ……… ……… ……………… …………… …………… ………15
致謝 …… ……… ……… ……… ……………… …………… …………… ………15
參考文獻……………………………………………………… ……………………………16
工業機械手液壓系統設計
機械設計制造及其自動化專業 李剛
指導老師 丁蘭英
摘要：本文主要介紹了上下料用機械手的設計過程，它包括了對于整個系統的工作要求和情況的分析，通過系統的工作過程確定整個液壓系統的結構設計。分析整個循環過程，確定系統工作原理圖，根據系統參數要求選擇標準的液壓元件，完成液壓系統的裝配圖。液壓集成塊作為現在液壓系統的主要部件，當前液壓集成塊應用開發受到了國內外液壓界的廣泛重視，液壓集成塊的CAD的研究與開發已為液壓工程設計提供了有力的支持，在對機械手液壓系統集成塊設計過程中，能夠與實際的加工工藝相結合。并且對現在的液壓集成塊的CAD技術有很好的認識。
關鍵詞：工業機械手，驅動，集成塊，原理
Design of The Industry Manipulator
Mechanical design & manufacture& automation LiGang Tutor DingLanying
Abstract: This text introduce upper and lower material spend design process of manipulator , it include to whole job requirements and analysis of situation of system mainly, confirm the whole structural design systematic in hydraulic pressure through the working course of the system. Analyse whole cyclical process , confirm systematic operation principle picture , require the hydraulic pressure component of the standard for selection according to systematic parameter, finish the installation diagram systematic in hydraulic pressure. Hydraulic pressure integrate piece as now main part , hydraulic pressure of system , hydraulic pressure at present integrate pieces of application and development receive domestic and international hydraulic pressure extensive attention of circle, hydraulic pressure integrate research and development of CAD of piece already offer effective support for engineering design of the hydraulic pressure, while design the system integration one of hydraulic pressure of the manipulator, can combine with real processing technology . And CAD integrating one to the present hydraulic pressure has very good understanding.
Keyword: Industry manipulator ,Drive , Hydraulic manifold block , Elements
１