【溫馨提示】壓縮包內含CAD圖并可以預覽，直觀呈現眼前查看、盡收眼底縱觀。打包內容里dwg后綴的文件為CAD圖，可編輯，無水印，高清圖，壓縮包內文檔可直接點開預覽，需要原稿請自助充值下載，所見才能所得，請見壓縮包內的文件預覽，請細心查看有疑問可以咨詢QQ：11970985或197216396
黑龍江工程學院本科生畢業設計
摘 要
隨著社會的飛速發展，科技越來越發達，世界也變得越來越小了，造成這個現象的基本原因就是交通工具的發展和普及，尤其是汽車的應用，靈活高速的汽車給我們的生活帶來了極大便利。一方面，轎車變的越來越重、動力越來越大；另一方面，人們?cè)絹?lái)越強調汽車駕乘的舒適性和安全性。因而，作為能保證汽車安全行駛的組成部分之一—制動系，有必要對它的組成構件進行設計計算。
本文系統詳細的介紹了汽車制動系的結構型式及其主要構件的設計計算，闡述了制動器的兩種結構型式的選擇和各自的工作原理、制動系的主要參數及其選擇、制動器主要零部件的結構設計和分析計算、制動驅動結構的結構型式選擇與設計計算。并且通過以上的比較分析，在經濟可靠的基礎上選擇歸納了伊蘭特轎車制動系主要構件的結構與參數，予以最為合理的配置。其中重點介紹了汽車車制動系的主要構件——浮鉗盤式制動器、液壓雙回路制動主缸的分析計算。
關鍵詞：汽車；制動系統；盤式制動器；液壓驅動；駐車制動
I
ABSTRACT
As the society is making great progress, scientific technology becomes more and more developed, and the world becomes smaller and smaller. The basic cause of this is the development and popularization of transportations, especially the application of automobiles, which bring great convenience to our lives. On one hand, what the car changes is heavier and heavier, motive force is greater and greater; On the other hand, people emphasize comfortableness and security that the automobile drives more and more. Therefore, as guaranteeing one of the components that the automobile goes safely--the brake system, it is necessary to carry on exhaustive designing calculation .
This text mainly introduces the structure pattern of the brake system and its designing calculation of main departments, and explains two kinds of structure patterns and choosing and one's own operation principle of the brake , main parameter of the brake system in the department and choosing, structural design and calculation of the main spare part of the brake , applying the brake urges the structure pattern of the structure to choose and design and calculate , makes the regulation device that power distributes. Through comparative analysis of the above , is it sum up Elantra apply the brake structure and parameter , department of main member to choose on the basis of the thing that economy is reliable , in order to reach and dispose best. Especially, it introduces the main member of the department of the brake system among them --Float pincers records of type brake , hydraulic pressure pairs of meeting way apply the brake analysis of master cylinder calculate with anti-lock braking system , urge slip resistance systematic theory analyse. And have checked to rubing the friction characteristic lined with slice at the end of the thesis.
Keyword: Automobile； The brake system； Disk brake；Hydraulic drive；Parking brake
II
黑龍江工程學院本科生畢業設計
目 錄
摘要 I
Abstract II
第1章 緒論 3
1.1 課題背景及目的 3
1.2 國內外研究現狀 3
1.3 課題研究方法 5
1.4 本設計的主要內容 5
第2章 總體設計方案 6
2.1 制動能源的選擇 7
2.2 行車制動系 8
2.3 制動管路的布置及原理 8
2.3.1 制動原理和工作過程 8
2.4 制動器的結構方案分析 8
2.5 本章小結 9
第3章 制動系主要參數確定 10
3.1基本參數 10
3.2同步附著系數的確定 10
3.3 制動器最大制動力矩確定 12
3.4盤式制動器的主要參數選擇 12
3.5.1制動盤直徑D 13
3.5.2制動盤厚度h 14
3.5.3摩擦襯塊外半徑R2和內半徑R1 14
3.5.4摩擦塊工作面積A 15
3.6本章小結 16
第4章 制動器的設計與計算 17
4.1 盤式制動器制動力矩計算 17
4.2駐車制動的制動力矩計算 17
4.3 制動襯片的耐磨性計算 18
4.4 本章小結 20
第5章 液壓制動驅動機構的設計計算 21
5.1 制動驅動機構的形式 21
5.2 分路系統 21
5.3 液壓制動驅動機構的設計計算 22
5.3.1 制動輪缸直徑d的確定 22
5.3.2 制動主缸直徑d0的確定 22
5.4 制動主缸設計 25
5.4．1主缸活塞的確定 25
5.4．2主缸殘余壓力P0 25
5.4．3主缸結構設計 26
5.4．4制動力分配調節裝置的選取 27
5.5真空助力器的設計計算 27
5.6制動踏板力 29
5.6．1制動踏板工作行程Sp 29
5.7制動器的主要結構元件 30
5.7.1 摩擦襯塊 30
5.7.2 支承 30
5.7.3 制動輪缸 30
5.7.4 制動盤 31
5.7.5 制動鉗 31
5.7.6 制動塊 31
5.8 本章小結 31
結論 32
參考文獻 33
致謝 34
附錄A 35
附錄B 38
2