購買設計請充值后下載，，資源目錄下的文件所見即所得，都可以點開預覽，，資料完整，充值下載就能得到。。?！咀ⅰ浚篸wg后綴為CAD圖，doc,docx為WORD文檔，有不明白之處，可咨詢QQ:1304139763
鹽城工學院畢業設計說明書 2009 雙孔支架鏜鉸組合機床總體及夾具設計 摘要 隨著生產的發展和專業化程度的提高 很多企業的產品產量越來 越大 精度也越來越高 首先 加工時 同時參加工作的刀具少 限制了機床 生產率的提高 其次 在加工多孔的工件時 需要對工件進行多次的定位和夾 緊 使零件的加工精度和生產率降低 第三 因?yàn)樵谝慌_(tái)機床上總是加工一種 工件 使通用機床的部件和機構造成冗余 因此 為了提高生產效率 滿足加 工要求 本課題設計了用于加工雙筋蹄零件的鏜鉸組合機床之鏜削主軸箱 根 據被加工零件確定加工孔的數量 位置 切削用量及主軸類型 擬訂了主軸箱 的傳動方式 應用最優化方法傳遞功率 削減振動 確定傳動參數 設計軸的 結構 進行如軸 軸承等相關零件的強度校核計算 通過以上設計 實現了兩 個雙筋蹄零件一次加工完成 較好地達到了設計要求 關鍵詞 組合機床 鏜床 夾具 雙筋蹄鏜鉸組合機床剛性鏜削頭及主軸箱設計 The design of the modular machine tool for double rebar and feet parts boring and drilling Abstract With the development of industry and improvement of the specialization the products output of enterprise is growing the precision is increased precise high First fewer tool in the work at the same time that limiting machine tool productivity Secondly it is needed to clamp and position many times in processing that reduce the accuracy and productivity Third parts and body of lead to machine tool will lead to redundant if process only one work in some machine tool Therefore to improve the machining efficiency and satisfy the processing requirements the boring headstocks are designed which are used for the unit machine tool which is used to roughly bore the holes of the double rebar and feet parts Based on the processed accessory the number the position and the machining data of the holes and the form of the principal axis are determined The driving way of the headstocks are drawn the power is transmits by the methods of optimization the driving parameter are determined the structure of the principal axis are designed and the strength of the parts such as the strength and the bears are checked Trough the design the four holes of two parts can be finished at one time and can fulfill the design requirements better Key words unit machine tool boring machine tool headstock