門把手注塑模具設計【一模兩腔優秀課程畢業設計含proe三維13張CAD圖紙+帶外文翻譯+28頁加正文1.28萬字】-zsmj03
門把手注塑模具設計說明書正文.docx
摘 要
本設計是門把手注塑模具設計。從模具設計的一般步驟開始，首先分析門把手的工藝特點，包括材料性能、成型特性與條件、結構工藝性等，（此產品的材料為ABS塑料，有利于提高制品的強度，采用一模兩腔的布局方法）。并選擇成型設備。制定出多種加工方案并比較各個方案之間的區別與各自的特點，然后分析門把手注塑模的分型面的選擇、型腔數目的確定及布置，之后再進行澆注系統、成型零件、合模導向機構、脫模機構、定距分型機構以及冷卻系統的設計。然后選擇標準模架和模具材料，并對注射機的工藝參數進行相關校核。通過計算和設計，此設計是可行的，并可以用于實際生產當中。
最后對模具的工作原理進行闡述，以及在安裝調試過程中可能出現的問題進行總結、分析，并給出了相應的解決方法。
關鍵詞：塑料模具，注射成型，模具設計
ABSTRACT
This graduation project the door handle injection mold design.firstly started from the general steps of mold design, and analyzes the process characteristics of the door handle, including material properties, forming characteristics and conditions, the process of the structure, (the material of the product is ABS plastic, can improve the strength of the product, the two cavity layout method. The first mock exam) And select molding equipment. Develop a variety of processing solutions and compare the difference between the characteristics of each scheme and respectively, and then analyzed to determine the layout and selection, type of door handle mold cavity number, and then pouring system, molding parts, mold oriented mechanism parting institutions distance parting mechanism and a cooling system. Then select the standard mold base and mold material, and the injection molding machine process parameters related to check. Through calculation and design, this design is feasible and can be used in actual production.
At last, the working principle of the die is expounded, and the possible problems in the process of installation and debugging are summarized and analyzed, and the corresponding solutions are given.
Key words：Plastic mold, injection molding, mold design
目 錄
第一章 前 言 1
1.1畢業設計設計方法、目的 1
1.2 國內外研究現狀及發展趨勢 1
第二章 門把手工藝性分析 4
2.1塑件的分析 4
2.2 ABS的性能分析 5
2.3 ABS的注射成形過程及工藝參數 5
第三章 門把手注塑模具的結構設計 7
3.1 分型面的選擇 7
3.2型腔數量與排列方式的確定 7
3.3 注射機的型號確定 8
3.4 澆注系統的設計 9
3.5 成型零部件的結構設計及計算 15
3.6排氣槽的設計 18
3.7脫模推出機構的設計 18
3.8冷卻系統的設計 19
3.9模具的總裝及模具的裝配、試模 20
結 論 23
謝 辭 24
參考文獻 25
【詳情如下】【需要咨詢購買全套設計請加QQ1459919609】
proe5.0
zhaungpei_asm.stp
動模座板.dwg
動模板.dwg
圖紙副本.zip
圓鑲件.dwg
型腔2.dwg
定模固定板.dwg
定模板.dwg
小方鑲件.dwg
成型方推桿.dwg
推板.dwg
支撐板.dwg
文件清單.txt
方鑲件.dwg
翻譯.docx
螺桿固定板.dwg
裝配圖.dwg
調研報告.docx
